User' s Manual
FF (Fast Forward) Button
Pressing the
button plays video forward at high speed. Pressing the button again toggles the
FF
? ? a nd
? ? a nd
playback speed from
,
. The screen displays
,
respectively.
Entering Fast Playback mode from Live Monitoring mode can be password protected.
PANIC Button
Pressing the
button starts panic recording of all camera channels, and displays
on the
PANIC
screen. Pressing the button again will stop panic recording. This operation can be user
password protected.
Enter Button
The
(Enter) button selects a highlighted item or completes an entry that you have made
during system setup. This is also used to enter or exit the active cameo mode during live
monitoring and playback.
Up, Down, Left, Right Arrow Buttons
These buttons are used to navigate through menus and Graphical User Interface (GUI). They
are also used to control Pan and Tilt when in the PTZ mode. The arrow buttons can be used to
move the position of the active cameo screen, and also move through screen pages.
Turning on the Power
Connecting the power cord to the DVR turns on the unit. The unit will take approximately 60
seconds to initialize.
14