Alarm Record Retrieval; Searching Motion Detection Recordings - Samsung SCR-3000N User Manual

DIGITAL VIDEO RECORDER
4

Alarm Record Retrieval

ALARM EVENT SEARCH
ID
01 ALARM START 2003-07-13 17:25:52
02 ALARM START 2003-07-12 06:37:38
03 ALARM START 2003-07-11 11:54:34
MOVE=[ /
Among the data on the HDD, the ones that were recorded when an alarm was triggered will be
displayed as a list based on the recording start time.
Other information is same as in "3. Recorded Data List View" on p. 7-4.
Note
Note
If the list of the recorded data cannot be shown in a screen, you can use the LEFT(
or RIGHT( ❿ ) button to view the list in pages. Press the LEFT(
previous page, or press the RIGHT(
7-5
[01/03]
EVENT DATE TIME
➛ ❿
❷ / / ] SELECT=[ ] EXIT=[SEARCH]
➛
➛ ) button to move to the
❿ ) button to move to the next page.
5

Searching Motion Detection Recordings

Of those data recorded on the HDD, the ones recorded by motion detection will be listed in
order of recording start time. Other information is same as in "3. Viewing the Recorded Data
List" on page 7-4.
)
MOTION EVENT SEARCH
ID EVENT DATE
01 MOTION START 2003-07-13 22:42:16
02 MOTION START 2003-07-12 14:24:45
03 MOTION START 2003-05-11 06:13:52
➛ ❿
MOVE=[ / ❷ / / ] SELECT=[ ] EXIT=[SEARCH]
Note
Note
- If the list of the recorded data cannot be shown in a screen, you can use the
LEFT( ➛ ) or RIGHT( ❿ ) button to view the list in pages. Press the LEFT(
move to the previous page, or press the RIGHT(
- In DVR MENU, if MULTIPLEXER of SYSTEM SETUP is set to WITH, MOTION EVENT
SEARCH of SEARCH MENU will be disabled.
[01/03]
TIME
➛ ) button to
❿ ) button to move to the next page.
7-6