Motion Detection Setup - Samsung SHR-5040 User Manual

Motion Detection Setup

motion detection setup
alarm-out
none
duration
all Camera
sensitivity high
area set
default
Set the motion detection area, sensitivity and alarm for
each camera video.
Press the enter(
the camera to be set.
 Alarm out
It sets the alarm output when a motion is detected.
Currently the system supports 2 Alarm Out functions
and 1 built-in speaker output.
 duration
Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
continUe: The alarm output sound will be
maintained until it is cancelled by pressing the ALArM
button manually on the front panel.
10~300 seconds: Sets the duration for alarm output.
 sensitivity
It relates to configuration for motion detection and
sensitivity.
The sensitivity can be set to Very High, High, Medium,
Low or Very Low.
 Area set
If you press the enter(
cursor to the video display area on the right, the motion
area can be set/cancelled.
( ): Sets the whole part as the motion area.
( ): Cancels the whole motion area.
If you press "default", the motion setup is reset to the
initial values.
SHR-5042_Eng_02.indd 33
ok Cancel
) button after moving the cursor on
) button after moving the
Video Loss Detection Setup
video loss detection setup
alarm-out duration
none 10 seC
none
10 seC
none 10 seC
none 10 seC
move/Control select
If a video loss occurs from each channel, it can be set to
generate an alarm output sound.
 Alarm out
Sets an alarm-out method when an event has occurred
from the Alarm In.
Currently, this system supports 2 Alarm Out functions
and 1 built-in speaker (beep) output.
The following screen appears when you press the
enter( ) button after moving the cursor to the Alarm
Out item.
1 2
Beep all
ok Cancel
 duration
Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
continUe: The alarm output sound is maintained
until it is cancelled by pressing the ALArM button
manually on the front panel.
10~300 seconds: Sets the duration for alarm output.
ok Cancel
exit
menu setup _33
2008-01-25 오전 9:31:26