Table of Contents
Advertisement
User' s Manual
Highlight the box beside Data Bit of the RS232 field. Pressing the
button toggles between 7
bit and 8 bit formats.
Highlight the box beside Stop Bit of the RS232 field. Pressing the
button toggles between 1
and 2 Stop Bits.
You can save your changes by highlighting OK and pressing the
button . Selecting Cancel
exits the screen without saving the changes.
Callback Center Setup Screen
The DVR can be set up to contact a computer running Smart View program and send an email
on a LAN when an event occurs. Also it can be set up to dial a pager with a numeric message
when an event occurs if you have a modem connected to the DVR.
Callback Center Setup by LAN connections
Figure 63 — Callback Center (LAN) Setup screen.
Highlight the box beside IP Address and enter the IP address of the computer you want
contacted during an event.
Highlight the box beside Retry and enter the number of times you would like the DVR to try
contacting the computer. You can select from 1 to 10 retrys.
56
Advertisement
Table of Contents
