Samsung SHR-3040 User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. DVR
  5. SHR-3040
  6. User manual
Samsung SHR-3040 User Manual

Samsung SHR-3040 User Manual

Samsung 4 channel dvr user's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

SHR-3040

4 Channel DVR

User's Manual
imagine
the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsungsecurity.com
02489A_SHR-3040_ENG.indb 1
2009-11-10 오후 2:12:48

Advertisement

Table of Contents
loading

Related Manuals for Samsung SHR-3040

Summary of Contents for Samsung SHR-3040

  • Page 1: Channel Dvr

    SHR-3040 4 Channel DVR User’s Manual imagine the possibilities Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsungsecurity.com 02489A_SHR-3040_ENG.indb 1 2009-11-10 오후 2:12:48...

  • Page 2: Key Features

    overview Key Features Display Real Time Display of Each Channel Auto Sequence display of 4 channels PIP (Picture in Picture) Pause Mode 2X ZOOM Quick Switch between Live and Playback Screen PTZ Camera supported record Up to 3 Levels of Quality and Frame Rates Audio Recording Scheduled Recording Event Recording using External Sensors and Motion Detection...

  • Page 3: Important Safety Instructions

    imPOrtaNt saFety iNstructiONs Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.

  • Page 4: Before Start

    If you want to open the case of your system for checking problems, please consult the expert from the shop where you bought the product. Before installing or replacing the HDD, or connecting a USB memory device to the DVR, check if it is compliant with the DVR. For the compatibility, contact the retailer where you purchased the product.
  • Page 5 Unpack the product package and put down the product on a flat floor or in an installation place. Check if all components of the package are included. SHR-3040 Remote Control/Battery (AAAX2) Mouse Installation CD User’s Manual AC Adaptor/Power Cable English _ 02489A_SHR-3040_ENG.indb 5...

  • Page 6: Table Of Contents

    overview cONteNts _ overview 02489A_SHR-3040_ENG.indb 6 overview Key Features Important Safety Instructions Before Start Contents Front Panel Rear Panel Remote Control at a Glance installation Checking the Installation Environment Installing HDD Connecting to a Different Device Network Connection USB Connection live Live Mode Switch...
  • Page 7 02489A_SHR-3040_ENG.indb 7 web viewer What is Web Viewer? Connecting to the Web Viewer Web Viewer at a Glance Client Setup Remote Setup Backup Player Remote Viewer Search appendix Product Specification Appearance & Dimension Troubleshooting (FAQ) English _ 2009-11-10 오후 2:12:52...

  • Page 8: Front Panel

    overview FrONt PaNel Item USB Port Power ! REC Play MODE MENU RETURN 4/PTZ 3/PIP 2/SEQ 1/ZOOM Direction Buttons ($%_ +) _ overview 02489A_SHR-3040_ENG.indb 8 Description Used to connect a USB memory device. Displays the status of the system power. Blinks when a hard disk is accessed.

  • Page 9: Rear Panel

    rear PaNel Item AUDIO IN AUDIO OUT RS-485 ALARM Output ALARM Input VIDEO IN (CH 1~4) VIDEO OUT PS/2 MOUSE DC Input SPOT OUT NETWORK 02489A_SHR-3040_ENG.indb 9 Description Audio signal input port. (RCA jack) Audio signal output port. (RCA jack) Connector for an RS-485-based external device.

  • Page 10: Remote Control At A Glance

    overview remOte cONtrOl at a GlaNce searcH The Search menu appears. The PTZ control menu appears. FuNc The Launcher menu appears. auDiO Turns on or off the sound. cH +/- Moves the channel up or down. Play Fast Backward, Pause, Stop, Fast Forward Switches to auto sequence mode.

  • Page 11: Checking The Installation Environment

    The followings are the recommendations when Samsung DVR is installed on a rack. Please ensure that the rack inside is not sealed. Please ensure the air is circulated through the inlet/outlet as shown in the picture.

  • Page 12: Installing Hdd

    As the HDD is sensitive to an external impact that may cause malfunction, please take caution not to impact on it. If the HDD is damaged from your carelessness or an external impact, Samsung shall not be responsible for any damage to it.

  • Page 13: Connecting To A Different Device

    PTZ and speed dome camera. Connect the external device to the RS-485 port (PIN 1:-, 2:+) in the rear [FuNctiON] panel. Check if the RS-485 device is compliant with the DVR. Please take care about the polarity (+/-) of RS-485 when installing it.

  • Page 14: Network Connection

    The DVR has one USB port on the front panel. You can connect the USB memory to the USB port for data backup or fi rmware upgrade. Format the USB device in the FAT32 fi le system, on your PC if not formatted on the DVR. 1_ installation 02489A_SHR-3040_ENG.indb 14...

  • Page 15: Live

    When it turns on, the system gets started automatically. login To access a DVR or restricted menu, you should have logged in to the DVR. In Live Screen, right-click any area of the screen. The Control icon appears in the bottom.
  • Page 16 You can check the status or operation of the DVR with the icons on the live screen. Item Current Date, Time Live Screen Status Network Connection Status Record Status Overwrite AUTO FULL Camera Name Event...

  • Page 17: View The Launcher Menu

    view the launcher menu You can use the Launcher menu appearing on the bottom of the live screen to access it. In Live mode, right-click any area or press the [FuNc] button on the remote control. The Launcher menu appears in the bottom. Move the cursor over the bottom, and click a desired item in the Launcher menu to access it.

  • Page 18: Mode Switch

    live CH10 CH11 CH13 CH14 mODe switcH CH16 You can use the channel buttons on the remote control or the front panel to switch to a single or 4-split mode for each channel. Press the channel button on the front panel, remote control or control icon, or click the channel icon in the Launcher menu.

  • Page 19: Zoom

    ZOOm This is available in Live mode where the screen of the selected channel will be enlarged by 2x. Press and hold the [ZOOm] button on the remote control or the front panel, or click < menu. The selected channel will be enlarged by 2x, while CH 1 will be enlarged to fit the screen in 4-split mode. In an enlarged screen, move the cursor to scroll through the screen.

  • Page 20: Record

    live recOrD You can make recording manually in Live mode. Other than in manual mode, recording will proceed as set in the Schedule menu. Press the [rec] button on the remote control or the front panel, or click < > in the Launcher menu. Recording will start while the button switches to Stop mode.

  • Page 21: Search

    searcH You can perform the search for recorded data by the time or by the search criteria such as an event. Press the [searcH] button on the remote control, or click < > in the Launcher menu. The Search menu appears. Use the direction buttons on the remote control or the front panel, or use the cursor to select one from menu items of Percent, Date/Time, and Event.

  • Page 22: Play

    live event search You can check and search for contents of a list of events such as alarm, motion detection, and video loss. Select <eveNt searcH> to display a list of events with information of the occurrence time and date. If you select an event to play, the selected event will be played instantly.

  • Page 23: Event Monitoring

    eveNt mONitOriNG This will display a specifi c event such as alarm and event on the screen of each channel. The event will be displayed regardless of the schedule setting. to set the event update Specify a time in “maiN meNu > cONFiGuratiON > iNterval setuP >...

  • Page 24: Event Monitoring On The Spot Monitor

    live eveNt mONitOriNG ON tHe sPOt mONitOr Apart from the Live screen, you can use the spot monitor to monitor an event from a specifi c channel through the SPOT OUT port. Specify an interval and use of the popup in “eXterNal Device >...

  • Page 25: Using The Menu

    setup usiNG tHe meNu You can configure the menu settings of screen display, record, configuration, external device, backup, language, firmware upgrade and system reset. You can use the remote control or mouse to select each one of the menu items above. To fast access a desired menu, it is recommended to learn about using the buttons and remote control in advance.

  • Page 26: Display Setup

    You can confi gure the settings of VGA, Screen Display and OSD. vGa setup Press the [meNu] button on the remote control or the front panel. The “Dvr lOG-iN” dialog appears. Enter the password and select <eNter>. The “maiN meNu” screen appears. Use the up/down ($%) button to select <DisPlay setuP>, and press [OK].

  • Page 27: Screen Display Setup

    screen Display setup See the previous section to repeat steps 1~3. (Page 26) Use the up/down ($%) button to select <screeN DisPlay>, and press [OK]. The “screeN DisPlay” screen appears. Use the up/down ($%) button to move to a desired item. VERTICAL POSITION: Used to move the input video up or down.

  • Page 28: Record

    You can set options of the record quality, frame rate and pre alarm record. Press the [meNu] button on the remote control or the front panel. The “Dvr lOG-iN” dialog appears. Enter the password and select <eNter>. The “maiN meNu” screen appears.

  • Page 29: Schedule Setup

    PRE ALARM RECORD: In event recording, set the advance recording time before an actual event. Pre alarm settings will be changed according to the frame rate. HDD REMAINING: Shows the remaining and total capacity of the current HDD. TIME REMAINING: Displays the expected recordable time in the “Date(D)/HOur(H)/miN(m)” format based on the selected quality.

  • Page 30: Configuration

    OVERWRITE: When the HDD is full while this option is set to <eNaBle>, the DVR will proceed with recording by overwriting the existing data. If set to <DisaBle>, the DVR will stop recording when the HDD is full. AUTO DELETION: If you have set an auto deletion period, the existing data before the specifi ed time will be deleted.

  • Page 31: Camera Setup

    camera setup See the previous section to repeat steps 1~3. (Page 30) Use the up/down ($%) button to select <camera setuP>, and press [OK]. The “camera setuP” screen appears. Use the up/down ($%) button to move to a desired item. CHANNEL: Select a channel to change the title.

  • Page 32: Motion Setup

    You can specify an area to detect a motion. If you select an area to detect a motion, the DVR will detect any motion occurring in that area. See the previous section to repeat steps 1~3. (Page 30) Use the up/down ($%) button to select <mOtiON...

  • Page 33: Interval Setup

    <NOrmal clOse> : The sensor is always closed. The alarm will sound when the sensor is open. DURATION: Specify the duration for which the DVR makes the alarm recording when an alarm sounds. When done, select <OK>. Your setting will be applied.

  • Page 34: Password Setup

    setup Date/time setup You can confi gure the settings of Date/Time, Format, and Daylight Saving. See the previous section to repeat steps 1~3. (Page 30) Use the up/down ($%) button to select <Date/time setuP>, and press [OK]. The “Date/time setuP” screen appears. Use the up/down ($%) button to move to a desired item.

  • Page 35: Buzzer Setup

    You will have a total of 10 IDs available including Admin. ADMIN: The administrator can set and perform all features of the DVR. MANAGER: In a local PC, you can change the password of the manager and perform backup. You can access Client Setup, Backup, Player, Search, and Remote Viewer directly from the Web Viewer.

  • Page 36: External Device

    You can confi gure the settings of Network, PTZ, Mouse, Audio, and Spot output. tcP/iP setup You can view the Live screen, confi gure the DVR settings, and backup HDD data remotely via the network. iP setup Press the [meNu] button on the remote control or the front panel.

  • Page 37: Ddns Setup

    A DDNS address consists of <english lower case “g”> + <mac address 6 digits from the end> + <websamsung.net>. Ex) If 6 digits of the MAC address of the DVR are <00:00:f0> from the end: g + 0000f0 + websamsung.net = g0000f0.websamsung.net See the previous section to repeat steps 1~4.

  • Page 38: Ptz Setup

    TCP/IP SETUP PTZ SETUP MOUSE SETUP AUDIO SETUP SPOT SETUP PTZ SETUP COMMAND SETUP SPEED SETUP COMMAND SETUP CHANNEL MODEL SAMSUNG PTZ ID BAUDRATE 002400 BPS COMMAND P/T RIGHT-DOWN LENGTH CODE A0 00 00 01 00 0A 3F 3F DEFAULT ALL-DEFAULT 2009-11-10 오후...

  • Page 39: Speed Setup

    speed setup You can set the pan and tilt speed of the PTZ camera. See the previous section to repeat steps 1~3. (Page 36) Use the up/down ($%) button to select <PtZ setuP>, and press [OK]. The “PtZ setuP” screen appears. Use the up/down ($%) button to select <sPeeD setuP>, and press [OK].

  • Page 40: Mouse Setup

    setup mouse setup You can adjust the operational sensitivity of the cursor. See the previous section to repeat steps 1~3. (Page 36) Use the up/down ($%) button to select <mOuse setuP>, and press [OK]. The “mOuse setuP” screen appears. Specify the <seNsitivity>. The higher the value is, the faster the mouse moves.

  • Page 41: Audio Setup

    audio setup You can adjust the I/O volume for the channel. During video recording, sound from the selected channel will be recorded as well. See the previous section to repeat steps 1~3. (Page 36) Use the up/down ($%) button to select <auDiO setuP>, and press [OK].

  • Page 42: Backup

    You can backup HDD recording data on a USB storage device. Backup Press the [meNu] button on the front panel or remote control. The “Dvr lOG-iN” dialog appears. Enter the password and select <eNter>. The “maiN meNu” screen appears. Use the up/down ($%) button to select <BacK-uP>, and press [OK].

  • Page 43: System Messages

    You can also play the data using <AUTO PLAYER> that is created in the USB storage device after the backup. system messages You will see the following messages when the DVR has checked USB storage devices. If no USB storage is inserted USB STORAGE IS NOT AVAILABLE.

  • Page 44: Firmware Upgrade

    Firmware uPGraDe You can upgrade the DVR fi rmware with the latest version. upgrade Press the [meNu] button on the front panel or remote control. The “Dvr lOG-iN” dialog appears. Enter the password and select <eNter>. The “maiN meNu” screen appears.

  • Page 45: Factory Default

    When done, you will see a message of “lOaD setuP success” on the screen. All current settings of the DVR will be saved to the USB device. It takes 5 to10 seconds, depending on the USB device. When done, select <cHaNGe FactOry DeFault>.

  • Page 46: Language

    Connect the USB device where your settings are saved. Select <lOaD setuP>. The DVR settings will be changed to your settings with a message of “lOaD setuP success” on the screen. It takes 5 to 10 seconds, depending on the USB device. This will change the DVR settings, not the factory default.

  • Page 47: Network Connection And Settings

    Ex) IP Address: 192.168.1.200  http://192.168.1.200 if the HttP port is other than 80 Launch the Internet browser. Provide an IP address and HTTP port number of the DVR in the address bar. Ex) IP Address: 192.168.1.200: Port Number (1000)  http://192.168.1.200:10000 connecting via url Launch the Internet browser.
  • Page 48 You can establish a direct connection, or connect DVR and remote users in a LAN environment. Set <DHcP mODe> to <maNual> in “maiN meNu > eXterNal Device > tcP/iP setuP > iP setuP”.

  • Page 49: Dvr Network

    Check the followings to prevent a possible confl ict with the static IP of the DVR. using Dvr static iP Internet Connection : You can connect the DVR to a ADSL/Cable modem-based IP router, or to the IP router in the LAN environment.
  • Page 50 The network settings may differ, depending on the router model. To connect to the DVR from outside, you must have set port forwarding for each of the IP port and web server port. Then, the IP port should be different from the web server port.

  • Page 51: Web Viewer

    Web Viewer enables you to connect to the DVR remotely and transfer live video, play and backup recording data, and confi gure settings remotely. system requirements The minimum hardware / operating system requirements to operate the Web Viewer are as below:...

  • Page 52: Web Viewer At A Glance

    Description Allows you to add/edit information necessary for network connection of the Web Viewer. Enables you to confi gure some settings of the DVR from a remote PC. Copies video data of the DVR to the PC. Opens and plays backup data in a remote PC.

  • Page 53: Client Setup

    DVR. LOCATION: Enter the location name that is registered with the server. USER ID/PASSWORD: Enter the user ID and password that you specifi ed in the DVR. Click <OK>. A list of registered sites will be displayed. update Click <uPDate> if you want to change information of a REGISTERED SITE.

  • Page 54: Remote Setup

    Enter the <PasswOrD> and click <cONNect>. Your PC will be connected to the DVR remotely. The network icon on the DVR screen will switch to display the connection status. Select a desired item from <cONFiGuratiON>, <recOrD> and <eXterNal> in the left.

  • Page 55: Record Schedule

    interval setup You can set the sequence screen time, or event record time. Refer to “iNterval setuP”. (Page 33) record confi guration You can set the recording quality. Refer to “recOrD setuP”. (Page 28) record schedule You can set the recording schedule. Refer to “scHeDule setuP”.

  • Page 56: Backup

    web viewer BacKuP Enter each necessary item and provide the <user PasswOrD>. Click <cONNect test>. When your confi guration passes the test, you will see a message of “success connect test!” On the <messaGe> box. Click <lOcK> and then select <set BacKuP time>. The “BacKuP iNFOrmatiON”...
  • Page 57 Player at a Glance Item System Time Status Pane SCREEN DIVISION CHANNEL OPEN FILE EDIT AVI SAVE DELAY AUDIO Operation Buttons Slide Bar Power 02489A_SHR-3040_ENG.indb 57 Description Displays the system time. Displays the backup start and end date/time with the operation status. You can select full screen or 4-split mode.
  • Page 58 web viewer image eDit Click <OPeN> and select a backup fi le to play. Switch to Single Screen mode and click <eDit>. The “eDit tOOl” window appears. When done, click <eDit>. Switch to backup play mode. Contrast Brightness Sharpness Blur Return Capture Print...

  • Page 59: Remote Viewer

    avi save Click <avi save>. The “OPtiON” window appears. Set the options to your preference. CHANNEL: Select a channel to save. FRAMERATE: Set the frame rate for a video to save. SIZE: Set the size of a video to save. The size will be set automatically according to the video.
  • Page 60 The selected channel will be displayed in one of the 4 split screens. You can control a remote PTZ camera that is connected to the DVR. To control a remote PTZ camera, ensure that you have completed PTZ settings in the DVR.
  • Page 61 Bandwidth: You must set the upload speed according to the network environment of the current DVR. Read: Loads the settings of the connected DVR into the Web Viewer. Read: Loads the settings of the connected DVR into the Web Viewer.

  • Page 62: Search

    For more information about the play bar, refer to “Player at a Glance > Operation Buttons”. (Page 57) eveNt You can check information about DVR events such as alarm detection, motion detection and video loss. Click <eveNt> in the lower left corner.

  • Page 63: Product Specification

    appendix PrODuct sPeciFicatiON Item Language Event Log Resolution Live/Record Rate Codec System Built In HDD Capacity Daylight Saving RS-485 Video Audio In/Out Mouse I/F Play back Speed Recording Schedule(Time/Motion/Alarm) Alarm Alarm Input Event Rec Alarm Output Motion/Video loss Time/Date Search Percentage of HDD/Event Back up Format...
  • Page 64 appendix Item Simultaneous Network Connection Netework Spec Network (TCP) Web viewer / BACK UP Network Web viewer port Set up Web viewer P/T/Z Control DDNS Firmware update Camera P/T/Z Device Monitor Dual Output (VGA/BNC) Composite/Spot Video Out Dimension PC Requirements WebViewer Operating Systems Operating Temperature...

  • Page 65: Appearance & Dimension

    aPPearaNce & DimeNsiON English _ 02489A_SHR-3040_ENG.indb 65 2009-11-10 오후 2:14:37...

  • Page 66: Troubleshooting (Faq)

     Connect the fan’s power cable properly to the DVR’s 12V power connector.  Remove any foreign substances on or around the cable.  If the problem persists after these actions, the fan or DVR is not in normal operation. Replace the fan.
  • Page 67  Check the USB memory works fine with a PC.  Check whether it is recognized normally and shows remaining space properly.  SHR-3040 supports USB1.1 and its writing speed may be slow. Consider its writing speed when you schedule the backup.
  • Page 68 Correct Disposal of This Product (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

Table of Contents