1. Manuals
  2. Brands
  3. Samsung Manuals
  4. DVR
  5. SHR-2042
  6. User manual

Samsung SHR-2042 User Manual

Real time dvr
Hide thumbs Also See for SHR-2042:
Table of Contents

Advertisement

Quick Links

SHR-2040/2041/2042-ENG-1
2005.6.29
4:58 PM
Page i
Real Time DVR
SHR-2040/2041/2042 User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Samsung SHR-2042

Summary of Contents for Samsung SHR-2042

  • Page 1 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page i Real Time DVR SHR-2040/2041/2042 User’s Manual...

  • Page 2: Safety Regulations

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page ii SHR-2040/2041/2042 USER’S MANUAL Safety Regulations Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. Do not use multiple plugs at once. This may cause abnormal heat generation or fire Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you.

  • Page 3: Standards Approvals

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page iii Before we start This User’s Manual describes the basic usage of SHR-2040/2041/2042. This Manual contains all the matters necessary for using SHR-2040/2041/2042 such as brief instruction, part name, function, connecting other equipment, and menu setup of SHR-2040/2041/2042.

  • Page 4: Table Of Contents

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page iv Contents Safety Regulations Before we start Standards Approvals Chapter 1 Overview 1. Introduction 2. Features 3. Part Names and Functions Chapter 2 Installation 1. Installation Environment Setup 2. Checking Product & Accessory 3. HDD Addition Chapter 3 Connecting with Other device 1.
  • Page 5 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page v Chapter 5 Menu Setup Before Use 1. System 2. Camera 5-12 3. Monitoring 5-16 4. Recording Mode 5-18 5. Event Record Mode 5-20 6. Record Schedule 5-25 7. Backup 5-27 8. Network 5-28 9. Network Setup 5-32 Chapter 6 PTZ Camera Control 1.
  • Page 6 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page vi Chapter 9 Smart Viewer 1. Introduction 2. Feature 3. PC Specification(Recommendation) 4. Smart Viewer Installation 5. Smart Viewer Program Execution 6. Smart Viewer Initial Screen 7. Monitoring Mode 8. Search Mode 9-23 9. Setup Mode 9-30 Appendix 1.

  • Page 7: Chapter 1 Overview

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1 Chapter 1 Overview...
  • Page 8 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-1 SHR-2040/2041/2042 USER’S MANUAL Introduction The Digital Video Recorder(DVR) compresses the 4 channel of camera input data into the MPEG4 video file and the 4 channel of voice input data into the ADPCM audio file in the real time to record them in the Hard Disk or retrieve them from the Hard Disk simultaneously.
  • Page 9 4 CH Loop Through Video Connectors Hard Disk Overwrite Mode Large Quantity Hard Disk Backup by USB2.0 Backup function by the USB2.0 memory and exterior CD/DVD writer(SHR-2042 supports the internal CD-RW.) Able to record, play, and transmit both audio and video files to Windows Network...

  • Page 10: Part Names And Functions

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-3 SHR-2040/2041/2042 USER’S MANUAL Part Names and Functions [SHR-2040] Name Function Power LED Displays power on/off condition. Alarm LED lights on when an event occurs. HDD Access Displays Normal Access to HDD. Upon Access to HDD, LED repeats on and off.
  • Page 11 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-4 Name Function PTZ Button Performs the TELE, WIDE, PRESET, and VIEW function. ZOOM ZOOM(TELE) Sets up Digital Zoom(x2). Button ( Performs the TELE function by pressing the PTZ button.) TELE FREEZE FREEZE(WIDE) Performs the FREEZE function in the DISPLAY Mode. Button ( Performs the WIDE function by pressing the PTZ button.) WIDE...
  • Page 12 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-5 SHR-2040/2041/2042 USER’S MANUAL [SHR-2041] [SHR-2042] Name Function Power LED Displays power on/off condition. Alarm LED lights on when an event occurs. HDD Access Displays Normal Access to HDD. Upon Access to HDD, LED repeats on and off.
  • Page 13 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-6 Name Function Displays 4 split screen. Displays the selected channel to the Single Mode Displays both LIVE Channel and Playback Channel in the PIP Screen simultaneously. MODE Mode Selection Search Button Displays 6 split screen. (1 CH playback screen and 4 CH live screen) Displays 9 split screen.
  • Page 14 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-7 SHR-2040/2041/2042 USER’S MANUAL [SHR-2040] Caution Caution Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condition. Name Function VIDEO IN...
  • Page 15 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 1-8 [SHR-2041/2042] Caution Caution Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condition. Name Function VIDEO IN...
  • Page 16 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2...

  • Page 17: Chapter 2 Installation

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3 Chapter 2 Installation...

  • Page 18: Installation Environment Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-1 SHR-2040/2041/2042 USER’S MANUAL Installation Environment Setup Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condition. You should pay attention to the following before you use the product.

  • Page 19: Checking Product & Accessory

    - Please keep special screws well to be used for HDD addition. - These are not supplied in SHR2040. 2 EA of RS-485/Alarm Terminal Block Main Body SHR-2040 Main Body SHR-2041 Main Body SHR-2042 Bracket Power Cord RS-485/Alarm Adapter (Only 2040) Terminal Block User’s Manual Screw WARNING) SHR-2040 set must use the adapter we provide.

  • Page 20: Hdd Addition

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-3 SHR-2040/2041/2042 USER’S MANUAL HDD Addition You can add up HDD to the product.(2040-1 HDD/2041-3 HDDs/2042-2 HDDs) However, since the product contains has many parts which may incur electric shock, accident, or product breakdown and improper installation or setup may disturb HDD recognition or normal product operation, you shall consult with an expert of the agency where you bought the product.
  • Page 21 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-4 [SHR-2041] [SHR-2042]...
  • Page 22 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-5 SHR-2040/2041/2042 USER’S MANUAL 2. Detach the cover from the product. (Pull out the cover slightly and lift from the back side to detach.) [SHR-2040] [SHR-2041/2042]...
  • Page 23 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-6 3. A bracket(BRACKET- HDD) is mounted to each side of product to fix the HDD. Please loosen the screw of the bracket to which you want to fix HDD. BRACKET-HDD...
  • Page 24 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-7 SHR-2040/2041/2042 USER’S MANUAL 4. Pull BRACKET-HDD to the product center to detach the fixed part at the bottom and detach BRACKET-HDD from the product. 5. Tighten 4 special screws(BWH,6-32UNC,L10.5), supplied as an accessory to fix HDD to BRACKET-HDD.
  • Page 25 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-8 6. Reattach HDD to the original position of BRACKET-HDD. (Assembly shall be done in the reverse procedure of disassembly as follows. Align the 5 fixing points at the bottom with the BRACKET-HDD fixing holes respectively and push BRACKET-HDD out of the product to align the screw fixing holes.
  • Page 26 - SHR-2040 : 1 at Primary Slot and 1 at Secondary Slot respectively - SHR-2041 : 2 at Primary Slot and 2 at Secondary Slot respectively - SHR-2042 : 2 at Primary Slot and 1 at Secondary Slot(The internal CD-RW is connected to the secondary master.) respectively Both HDDs attached to Primary Slot and Secondary Slot should be set to Master and Slave respectively.
  • Page 27 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-10 WARNING ! Regarding the sub fan, you need additional brackets and sub fans as follows. The sub fan is shaped like this when viewed from the front and back. Please pay attention to the fan direction to let wind go through the fan. @ Fix the fan as follows 2-10...
  • Page 28 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-11 SHR-2040/2041/2042 USER’S MANUAL # Please install the fan which is seen at the right from the front view of SHR-set as follows. 2-11...
  • Page 29 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-12 $ The cable should be out from the left hole. 2-12...
  • Page 30 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 2-13...
  • Page 31 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3 Chapter 3 Connecting with other device...
  • Page 32 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-1 SHR-2040/2041/2042 USER’S MANUAL Connecting the Video, Audio, and Monitor [SHR-2040]...
  • Page 33 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-2 [SHR-2041/2042]...

  • Page 34: Connecting The Network

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-3 SHR-2040/2041/2042 USER’S MANUAL Connecting the Network Connecting to Internet through Ethernet(10/100BaseT) [SHR-2040] Connecting to Internet through ADSL [SHR-2040]...
  • Page 35 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-4 Connecting to Internet through Ethernet(10/100BaseT) [SHR-2041/2042] Connecting to Internet through ADSL [SHR-2041/2042]...

  • Page 36: Connecting The Usb

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-5 SHR-2040/2041/2042 USER’S MANUAL Connecting the USB 1. There are two USB connecting ports on the front and back of SHR-2040/2041/2042. 2. USB Hard Disk, USB CD/DVD, and USB Memory are connected through the front and back ports of SHR-2040/2041/2042.

  • Page 37: Connecting The Alarm Input/Output

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-6 Connecting the Alarm Input/Output The Alarm IN/OUT port in the back of SHR-2040/2041/2042 is composed of the following elements. ALARM IN/OUT Connection Name Function - ALARM IN1 - ALARM IN2 ALARM Input Port - ALARM IN3 - ALARM IN4 On receiving an ALARM RESET signal, the sys- tem cancels the current ALARM input and output...
  • Page 38 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-7 SHR-2040/2041/2042 USER’S MANUAL ALARM IN/OUT Connection...

  • Page 39: Connecting The Rs-485 Device

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 3-8 Connecting the RS-485 Device Connect the RS-485 Device through the back port of SHR- SHR-2040/2041/2042. You can install and control the PTZ camera supporting the RS-485 communication. You can adopt either Half Duplex or Full Duplex method for the connection. PTZ device SHR-2040/2041/2042 Rear...
  • Page 40 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4...

  • Page 41: Chapter 4 Live

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5 Chapter 4 Live...

  • Page 42: System Operation

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-1 SHR-2040/2041/2042 USER’S MANUAL System Operation Turn the power on and the following LOGO pops up on the screen. After the LOGO appears, all of LED in the front flickers 6 times to initialize the system for operation.

  • Page 43: Live Screen Mode

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-2 Live screen Mode Definition of Live Screen Icon The Live screen icons display the current setup and function status of each screen. V.Loss CAM_01 CAM_01 : Recording Icon Each icon represents Normal / Event (Alarm + Motion) / Schedule Recording. : Recording Video Size Icon Each icon represents the recording size of Large / Normal / CIF.
  • Page 44 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-3 SHR-2040/2041/2042 USER’S MANUAL : Auto sequence Icon This icon appears in the auto sequence mode. : Backup Playback Icon This icon appears when the backup data is played. : Fan Error Icon This icon appears when the fan stops. : This icon appears when there is no HDD.

  • Page 45: Selecting Live Screen Mode

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-4 Selecting Live Screen Mode Each mode may be selected by [MODE Button] and [CH1 ~ CH4 Button]. The following figure shows Live Mode after converted. The default setup is 4 Split Screen Mode. You are able to choose other modes than Full Screen Mode by the [MODE] button in sequence.

  • Page 46: Live Channel Selection And Audio On/Off Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-5 SHR-2040/2041/2042 USER’S MANUAL Live Channel Selection and Audio On/Off Setup In other split modes than Full Screen Mode and Auto Sequence Mode, you can choose a channel to be displayed in each split area on your own. In addition, the channel being set to Audio On can be set to Audio On/Off in all Live Modes.

  • Page 47: Zoom Function

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-6 Freeze and Zoom Freeze Function Freeze function pauses the video image in the Live Screen, it is only available in the Live Mode. You can set Freeze On/Off with [FREEZE] Button and [FREEZE LED] is turned on or off depending on the Freeze On/Off setup condition.

  • Page 48: Event Monitoring

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-7 SHR-2040/2041/2042 USER’S MANUAL Event Monitoring Event monitoring displays the channel synchronized with a event on the screen when a special event (Sensor/Motion/Video Loss) occurs. Event monitoring On/Off and event duration setup is available in [Menu] [Monitoring] mode. If you set the event monitoring interval to 5 seconds and an event occurs at CH2 in the beginning as following figure, the system will display CH2 in the full screen for 5 second.

  • Page 49: Spot-Out Monitoring

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-8 Spot-out monitoring Spot-out Monitoring has nothing to do with Live Screen Output, it monitors the full screen of a certain channel. If you select the Monitoring in the MENU, the one channel among CH1 ~ CH4 is output with a Spot-out or channels are output one by one at an interval as Auto Sequence Mode in the Live Mode.
  • Page 50 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 4-9...

  • Page 51: Menu Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5 Chapter 5 Menu Setup...

  • Page 52: Before Use

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-1 SHR-2040/2041/2042 USER’S MANUAL Before Use Selection The yellow cursor shows the current window. Use the œ,ƒ,¦, ‹ key in the front to move the cursor on your desirous menu. If you press the “Enter” key with the cursor clicking on your desirable menu, the system will enter the new mode.
  • Page 53 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-2 System System Menu has the following items in detail. Date/Time/Language Setup ¦, ‹ Press the “Enter” key and the key to move to Y/M/D. œ, ƒ Use the key to change the date. Press the “Enter” key to come out of the mode. Time ¦, ‹...
  • Page 54 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-3 SHR-2040/2041/2042 USER’S MANUAL Note Note [Date/Time Change] Pressing “OK” after you change date and time, you will be asked by a pop-up window if you really confirm the change. Here, press ”Yes” to change the time. Since Date/Time does not change in backup process, be sure to stop the backup process before you change Date/Time.
  • Page 55 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-4 Password The Default Password is 4321. New Password This is used to change the system password inside SHR-2040/2041/2042. You are allowed to create a password up to 4 digits. Press the “Enter” key and a channel button from 1 ~ 4 at the left.

  • Page 56: Load Factory Default

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-5 SHR-2040/2041/2042 USER’S MANUAL Load Factory Default It used to initialize all the menu setup values. The recorded data will not be deleted. Press “OK” in the confirmation window to start initializing. System Log System Log is used to check the important record by an administrator. It displays such contents of a system related log and its execution date/time as System Start, System Termination, and Menu Setup Change.

  • Page 57: Event Log

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-6 System Log List System Start Starts the system. Time Change Changes the Date/Time. Login(Admin) Viewer Login (Admin) Load Factory Default Initializes the system. Logout(Admin) Viewer Logout (Admin) System Upgrade Changes the system S/W. Login(User) Viewer Login (User) Disk Full No Space in the HDD...
  • Page 58 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-7 SHR-2040/2041/2042 USER’S MANUAL System Information and Setup Software Version : Displays the current version. Setup is not available. Broadcast Format : Displays the current Format(NTSC/PAL) . Setup is not available. Mac Address : 6 Byte hardware address. Setup is not available. Device Erase This erases the data in ATA / USB HDD / USB memory.

  • Page 59: Hdd Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-8 Caution Caution [Device Erase] Data will not be deleted in the backup mode. Please be sure to stop the backup before you delete a data. In the recording mode, suspend the recording and delete a data. Caution Caution [USB S/W Upgrade]...

  • Page 60: Hdd Mode Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-9 SHR-2040/2041/2042 USER’S MANUAL HDD Mode Setup HDD End Mode Stop : Stops recording when HDD is full during the recording. Overwrite : Deletes the original data and save a new data when HDD is full during the recording.
  • Page 61 Caution Caution [Disk Overwrite] In the overwrite Mode, the previous Event data is deleted and the mode is changed. Remote control Device MENU for the use of Samsung system keyboard Remote Control Device Device Samsung System Keybord Baudrate Parity Date...

  • Page 62: System Shutdown

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-11 SHR-2040/2041/2042 USER’S MANUAL System Shutdown Remote Control Device Terminates the work in action safely and turns the power off. Press “OK” in the confirmation window and plug out when you see “Safe to Power Off”. Caution Caution [System Shutdown]...
  • Page 63 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-12 Camera The detailed Camera Menu items are as follows. Camera Config. Video On : Camera images from a selected channel appear. Off : Camera images from a selected channel disappear. Covert1 : Displays the information except for the Video information of selected channel. Covert2 : Does not display the any information.
  • Page 64 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-13 SHR-2040/2041/2042 USER’S MANUAL Title You can name the camera of selected channel. If you press the [Enter] key, the Virtual keyboard will come out. ‹¤Virtual Keyboard If you move the cursor, you can type text by text. Up to 15 texts can be typed.

  • Page 65: Ptz Device

    Protocol It is supported by the PTZ device. The following protocols are now being supported. Samsung/ Vicon/ Panasonic/ AD/ Philips/ Erna/ PelcoD/ PelcoP/Vcltp/ Diamond/ Kalatel Baurate Baurate is supported by the PTZ device. 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400 Parity It is set to the one of None, Even, and Odd.

  • Page 66: Screen Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-15 SHR-2040/2041/2042 USER’S MANUAL Screen Setup It is a window to set Brightness/Contrast/Color for the camera image of each channel. Put the cursor on the channel that you want to adjust and set Brightness/Contrast/Color. Once selected, the channel appears in the right PIP area. Use the œ or ƒ button to adjust the value from 0 to 100.
  • Page 67 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-16 Monitoring Event Monitoring It is possible to set to Off/3sec/5sec/10sec/20sec/30sec/Continuous. Off : Event Monitoring does not operate to turn to the screen where an event occurs. 3sec/ 5sec/ 10sec/ 20sec/ 30sec : Sets the duration time of screen in the Auto Sequence mode.
  • Page 68 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-17 SHR-2040/2041/2042 USER’S MANUAL Monitor You are not allowed to connect VGA OUT and Composite/S-Video OUT simultaneous- ly. Consequently, the user is obliged to choose either Composite Output or S-Video Output. Composite : Makes the output come out through the “Composite / S-Video OUT” port. VGA : Makes the output come out through the “VGA Out”...

  • Page 69: Recording Mode

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-18 Recording Mode Record Mode Details for Record Mode Menu are as follows. NTSC If you press the front “REC” button, the mode value to be recorded will be set. For the setup of Event Recording Mode value, refer to 5-20. Event Recording Mode Setup Menu.
  • Page 70 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-19 SHR-2040/2041/2042 USER’S MANUAL Record Video size Mode Video size It sets the video to be recorded. Half D1 : (NTSC) 720x240(N) . Normal (PAL) 720x288(N) . Normal : (NTSC) 352x240(C) . CIF (PAL) 352x288(C) . CIF Auto Deletion Press the [Off] button at the bottom of left to select either OFF or On.

  • Page 71: Event Record Mode

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-20 Event Record Mode The detailed items of Event Record Menu are as follows. Event Record Mode setup NTSC Event Record Mode setup Sets a mode to be recorded when an event occurs. V. Size (Video Size ) Sets the size of a screen to be recorded.
  • Page 72 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-21 SHR-2040/2041/2042 USER’S MANUAL Quality Quality will be determined. Select the one among Very High/High/Normal/Low. Rate Sets the Rate the number of screen recorded every second. It you set to 15ips, the system records too many screens per second and play continues intermittently since recording is more detailed.
  • Page 73 SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-22 Alarm Detection Setup Off : Sensor does not operate. N.O(Normal Open) Sensor : Sensor remains open all the time and if closed, an alarm will be issued. (A Contact) N.C(Normal Close) Sensor : Sensor remains closed all the time and if open, an alarm will be issued.

  • Page 74: Motion Detection Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-23 SHR-2040/2041/2042 USER’S MANUAL Motion Detection Setup Motion Detection Mode Off : Motion Detection does not operate On : Motion Detection operates. Area Selects the Motion Detection area. It is composed of 45x40(NTSC)/45x48(PAL) sized Block. It is impossible to set 4 block rows(Up/Down/Left/Right) to allow them to be displayed in all monitors.
  • Page 75 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-24 Sensitivity Sets the sensitivity of motion detection. Sensitivity grade consists of Low Medium Very High in the ascending order. Alarm-Out Sets the Alarm-Out when Motion occurs. 5 Alarm Outs are supported. Select an alarm-out that you want to synchronize with the current motion channel. Multi-selection is possible.

  • Page 76: Record Schedule

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-25 SHR-2040/2041/2042 USER’S MANUAL Record Schedule This setup selects a time to record automatically. Selection by the day or by the time is available. The default value is set to “Event Record”. Press “CH >” copies the value of Channel 1 to all the channels. The horizontal axis numbered from 0 to 23 represents the time value.
  • Page 77 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-26 Schedule / Event Record On occurrence of Event, Continuous Recording is replaced with Event Recording Mode. Holiday If you press “Holiday”, a calendar pops up and you are able to designate holidays. Move to a date and press “Enter” to complete designation. Press “Enter”...
  • Page 78 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-27 SHR-2040/2041/2042 USER’S MANUAL Backup Backup If there is a device, the free space and the backup device is displayed. Select a date, time, and camera No. to backup, and press “Start”. When you change Start Date/Time or End Date/Time, free space keeps updated in the Free Space zone.
  • Page 79 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-28 Network IP Setup Connection Mode Designates the kind of the network connected to the main body of SHR-2040/2041/2042. Static IP : When the main body is connected to the network with Static IP. Dynamic IP : When the main body is connected to the network with Dynamic IP supplied by DHCP.
  • Page 80 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-29 SHR-2040/2041/2042 USER’S MANUAL Sets the IP address for the main body of SHR-2040/2041/2042 to connect with the network. If the Connection Mode is set to Static IP, you shall type in IP yourself. If the connection mode is Dynamic IP or ADSL(PPPoE), the IP allocated by the DHCP server or ADSL company will be automatically displayed.
  • Page 81 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-30 Transfer Protocol Settings You may select either TCP or UDP for the protocol type. If you select ADSL from the IP setup page, only TCP is available. While TCP is selected, Audio transmission is not available. The available Port(TCP) ranges from 554 to 998 and the port number will be changed by 4.
  • Page 82 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-31 SHR-2040/2041/2042 USER’S MANUAL Callback Settings The Callback function is used to forward a callback message to the IP where SmartViewer is in action in case Alarm, Motion Detection, or Video Loss event occurs. On/Off : Off is default but you may choose On. IP Address : IP setting is available only when On is selected from On/off Setting.

  • Page 83: Network Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 5-32 Network Setup Port Setup for SmartViewer Connection The Port value for DVR registration of SmartViewer (Setup Site Setup) shall be as same as that of the set (TCP). If you want to use the IP Router, you shall forward the activated Port depending on the current setting value.
  • Page 84 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 6...

  • Page 85: Ptz Camera Control

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 7 Chapter 6 PTZ Camera Control...

  • Page 86: Ptz Camera Control Mode

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 6-1 SHR-2040/2041/2042 USER’S MANUAL PTZ Camera Control Mode Select a proper PTZ camera Configuration value in MENU to enter PTZ Control Mode. Selected in MENU, the PTZ symbol( ) is displayed on the channel in the screen. ¦...
  • Page 87 Menu, and other functions additionally. [SHR-2040] [SHR-2041] [SHR-2042] Press the PTZ button in Live Mode to cancel PTZ Camera Control Mode. After cancellation, the PTZ symbol on the screen will turn white from yellow while the PTZ button will lose its blue light.

  • Page 88: Basic Operation Of Pan, Tilt, & Zoom

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 6-3 SHR-2040/2041/2042 USER’S MANUAL Basic Operation of PAN, TILT, & ZOOM Press the LEFT or RIGHT button in front SHR-2040/2041/2042 in PTZ Camera Control Mode to control PTZ Camera horizontally. TELE WIDE VIEW PRESET TILT Press the UP or DOWN button in front SHR-2040/2041/2042 in PTZ Camera Control Mode to control PTZ Camera vertically.

  • Page 89: Preset Setup

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 6-4 Preset Setup Records a certain position of PTZ Camera. Memorizes up to 20 PTZ Camera positions at the moment. Note Note For AD Protocol PTZ Camera, this memorizes only 7 Presets. Press the Preset button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to set up Preset.
  • Page 90 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 6-5 SHR-2040/2041/2042 USER’S MANUAL Move the cursor to right and press ENTER in PTZ Control Mode first. Then, press the “Enter” to run P/T/Z/ operation mode in the PIP screen and press the “Enter” again to cancel P/T/Z/ Motion Mode.

  • Page 91: Camera Menu Setup

    Camera Menu is a menu supplied by PTZ Camera itself. This Menu sets up several conditions of PTZ Camera. Note Note Panasonic or Samsung Protocol Camera only is authorized for Camera Menu setup. Press the Preset button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to select Camera Menu. TELE...

  • Page 92: Preset View

    SHR-2040/2041/2042 USER’S MANUAL Preset View Preset setup allows your movement to a certain saved position of PTZ Camera. Press the VIEW button in front of SHR-2040/2041/2042 in Single Screen PTZ Camera Control Mode to select Preset.(For example, Samsung Protocol) TELE WIDE VIEW...

  • Page 93: Other View

    Control Mode to supply PTZ Camera. This is a very special function. Note Note Samsung, Panasonic, PelcoP, or PelcoD Protocol PTZ Camera supports this function. Samsung : Auto Pan / Scan / Pattern Panasonic : Auto Pan / Sequence / Sort...
  • Page 94 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 6-9...
  • Page 95 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 7 Chapter 7 Recording...

  • Page 96: Rec (Normal Recording)

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 7-1 SHR-2040/2041/2042 USER’S MANUAL REC (Normal Recording) Pressing REC the button starts recording as set in the record mode. Then, REC LED lights on and a recording icon appears on the screen. During the recording in HDD, the front HDD LED blinks.

  • Page 97: Schedule Recording

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 7-2 Schedule Recording While “Record Schedule” or “Schedule/Event recording” is selected in the Record Schedule menu, Schedule Recording automatically starts. Otherwise, Schedule Recording remains inactivated. During the Schedule Recording, Recording Icon appears on the screen. During the recording in HDD, the front HDD LED blinks.

  • Page 98: Event Recording

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 7-3 SHR-2040/2041/2042 USER’S MANUAL Event Recording Alarm Detection Sensor operation mode in Alarm of Event Record menu shall be set to N.O (Normal Open) or N.C (Normal Close). Motion Detection Motion detection in the Event Recording menu shall be set to On. Video Loss Detection Video Loss in Event Record menu shall be set to On.

  • Page 99: Search And Play

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 7-4 Chapter 8 Search and Play...
  • Page 100 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-1 SHR-2040/2041/2042 USER’S MANUAL Before Use Pressing the “SEARCH” button shows Search Menu on the screen as seen above. Calendar Search searches a video file by the use of a calendar at the desired time. Event Search searches a video file recorded by the occurrence of event.

  • Page 101: Calendar Search

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-2 Calendar Search Be sure to select both the channel and the date to search. And press the [Start] button to search for the desired time. Use a calendar to search the video file of desired time. Four channels in maximum are in the range of search.

  • Page 102: Event Search

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-3 SHR-2040/2041/2042 USER’S MANUAL Event Search Searches Normal Recording, Schedule Recording, Alarm Recording, Motion Recording, and V.Loss(Video Loss) Recording by the time. You shall select a channel to search to see the event information of the channel. On the basis of event information for each channel, the system searches a video file for the event.

  • Page 103: Date/Time Search

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-4 Date/Time Search Use the Day/Time information to search a video file at the time as you desire. Up to 4 channels can be searched at once. After you select a channel with the œ, ƒ, [Enter] button, the checkbox on the right of selected event number will be checked.

  • Page 104: Go To First Search

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-5 SHR-2040/2041/2042 USER’S MANUAL Go to First Search Searches the oldest one among recorded video files. Up to 4 channels can be searched at once. After you select a channel with the œ, ƒ, [Enter] button, the checkbox on the right of the selected channel number will be checked.

  • Page 105: Go To Last Search

    SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-6 Go to Last Search Searches the latest one among recorded video files. Up to 4 channels can be searched at once. After you select a channel with the œ, ƒ,[Enter] button, the checkbox on the right of the selected channel number will be checked.
  • Page 106 Select the file name to backup, and the detail information of a file is displayed in the below. The [Previous] button shows the previous page. The [Next] button shows the next page. The [Start] button plays the desired file. The [Exit] button exits the menu. Note Note SHR-2042 supports the internal CD-R/W.
  • Page 107 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-8 Playback ‹ ¤ II Press the PLAY/PAUSE button( ) to play the data recorded in HDD. If you used the SEARCH button for playback just before, the system would remember the information of the played channel until you click the PLAY/PAUSE button( ‹...
  • Page 108 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-9 SHR-2040/2041/2042 USER’S MANUAL Definition Play Screen Mode PIP Screen 4 Split Screen Single Screen 6 Split Screen 9 Split Screen 4 Split Screen : If you select more than a channel, 4 Split Screen will appear. Single Screen : This appears when you select one channel in Search.
  • Page 109 SHR-2040/2041/2042-ENG-1 2005.6.29 4:59 PM Page 8-10 Play at Faster Speed If you press the LEFT or RIGHT button( ¦ ¦ ‹ ‹ ) during the playback, you will be able to see the screen at the x2, x4, x8, x16, x32, and x64 speed either forwardly or reversely.
  • Page 110 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 1...

  • Page 111: Smart Viewer

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9 Chapter 9 Smart Viewer...
  • Page 112 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-1 SHR-2040/2041/2042 USER’S MANUAL Introduction Smart Viewer is a program that a general PC user is able to install SHR-2040/2041/2042 to his PC to monitor the video and audio data in the real time through network without going to the site where SHR-2040/2041/2042 is installed.
  • Page 113 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-2 Feature Thanks to the transmission of video data compressed by the MPEG-4 Video Compression method, it can play the video images of good quality. Thanks to the G.726 Voice Compression method, it supplies the voice data of good quality.

  • Page 114: Pc Specification(Recommendation)

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-3 SHR-2040/2041/2042 USER’S MANUAL PC Specification(Recommendation) OS : Win98SE, WinMe, Win2000, WinXP Recommendation : CPU Pentium 3 1GHz or higher RAM 256 MB or higher VGA RAM 32Mb or higher DirectX 8.1 or higher Note Note Depending on Recording Rate, Video Size, and user’s PC specification set to SHR-SHR-2040/2041/2042, the number of Smart Viewer playback frame varies.

  • Page 115: Smart Viewer Installation

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-4 Smart Viewer Installation Smart Viewer Installation Put a Smart Viewer Program CD in CD-ROM and open the “Smart Viewer” folder in the CD. Run the “Setup.exe” file.
  • Page 116 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-5 SHR-2040/2041/2042 USER’S MANUAL Click the “Next” button. If you agree with Smart Viewer License, click “Yes”. Designate a folder to install Smart Viewer in it and click “Next”.
  • Page 117 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-6 The system proceeds with setup file installation and system setup. Installation is complete. Click the “Finish” to terminate the installation.

  • Page 118: Smart Viewer Program Execution

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-7 SHR-2040/2041/2042 USER’S MANUAL Smart Viewer Program Execution Double-click the Smart Viewer icon in the background screen to run the program.

  • Page 119: Smart Viewer Initial Screen

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-8 Smart Viewer Initial Screen Screen Description ! This is the button to enter the Search mode in which you can search and play remote the video file recorded in SHR-2040/2041/2042 and enter the Monitoring mode for real-time video monitoring.

  • Page 120: Monitoring Mode

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-9 SHR-2040/2041/2042 USER’S MANUAL Monitoring Mode DVR(SHR-2040/2041/2042) / SITE Connection - Select the name of DVR(SHR-2040/2041/2042) or site for connection and click the connection button. Note Note You can set the name, IP, and password of DVR(SHR-2040/2041/2042) for connection in the Setup mode.
  • Page 121 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-10 Note Note No more than 3 users, one Admin. authorized user and 2 User authorized users are allowed to access SHR-2040/2041/2042 simultaneously.(In the case of multicast, 5 User authorized users are allowable.) Caution Caution Once occupied by 3 users( In the case of multicast, 6 users), SHR-2040/2041/2042 does not permit more connection.
  • Page 122 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-11 SHR-2040/2041/2042 USER’S MANUAL Time Information - As soon as you are connected to SHR-2040/2041/2042, the current date, day, and time of SHR-2040/2041/2042 will be displayed. - Otherwise, the current date, day, and time of your PC will be displayed. Connection Information - As soon as you are connected to SHR-2040/2041/2042, the connection button will display connection status.
  • Page 123 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-12 Note Note # Clicking the speaker icon turns the audio of channel on or off. : Audio OFF : Audio ON If you turn the audio of a SHR-2040/2041/2042 channel off, “Disable” will be displayed.
  • Page 124 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-13 SHR-2040/2041/2042 USER’S MANUAL Event Log Display Window - Click the Log button to activate the log display window. - It displays the event(alarm, user connection, and setup change) occurring at SHR-2040/2041/2042 in the real-time. Note Note [Event Message]...
  • Page 125 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-14 Caution Caution When Time Change, Load Factory Default, Network Change, System Shutdown, or Hdd Format event occurs, Smart Viewer terminates the connection automatically. Camera connection Indication Window - Displays the connection condition of DVR and CAMERA in the list. Note Note [DVR Icon Color]...
  • Page 126 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-15 SHR-2040/2041/2042 USER’S MANUAL Screen Split Selection Button - Small Sized Single / Single / Quad / Nine-Split Mode Sixteen-Split Mode - You can change the Split Mode of the screen under monitoring. Sequence Mode Button - Changes the channel to be played at the preset interval.
  • Page 127 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-16 : When monitoring with Quad Mode : When monitoring with Single Mode : Camera Off Note Note The number in the screen icon indicates the screen position in SmartViewer. : The orange icon indicates the current channel is connected to a camera. : The gray icon indicates the current channel is connected to a camera but not displayed in the screen.
  • Page 128 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-17 SHR-2040/2041/2042 USER’S MANUAL NEXT Button - Click the NEXT(Mouse Left Button) to see the channel next to the current channel. - In Single Mode : 1 1 (CH) - In Quad Mode : 1,2,3,4 1,2,3,4 (CH) - In Nine-Split Mode : 1,2,3,4 1,2,3,4 (CH)
  • Page 129 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-18 FAVORITE Button - If you press FAVORITE, the FAVORITE window will be activated. If you click the current FAVORITE, the cameras saved in the current setting value will be displayed in the screen. You may delete the selected FAVORITE or all FAVORITE setting values.
  • Page 130 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-19 SHR-2040/2041/2042 USER’S MANUAL Video Recording Button - If you select a channel in the playback and click the “Save” button, the video will be saved in a file format with the extension of *.dvr in a designated folder of your - The name of the directory in which an image will be saved, the file name, and the image save length shall be set up at the Setup Mode Viewer Setup.
  • Page 131 Note Note The PAN / TILT / ZOOM function is supported to all the cameras. But, POWER ZOOM is supported only by Samsung Smart Dome Camera, and assured to the operation of TILT below 45°. 9-20...
  • Page 132 The name of @,#, and $ functions varies depending on the camera and some cameras do not support these functions. - The Samsung camera supports all the functions and names. - The Panasonic camera supports all the functions, but with different names.
  • Page 133 # This is a button for the role of Enter. Note Note The Camera Menu Setup function is supported by Samsung and Panasonic camera only. Caution Caution As far as SHR-2040/2041/2042 uses the PTZ camera control functions, Smart Viewer can not control PTZ Camera.

  • Page 134: Search Mode

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-23 SHR-2040/2041/2042 USER’S MANUAL Search Mode The initial screen of search mode - The search mode is divided into the remote mode to search and play the SHR-2040/2041/2042 video and the local mode to play *.dvr file saved in the directory designated by your PC.
  • Page 135 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-24 DVR(SHR-2040/2041/2042) Selection/Change by contacting SITE - Same as “DVR(SHR-2040/2041/2042)/SITE Connection” of the monitoring mode. DVR(SHR-2040/2041/2042) Selection/Change by contacting SITE - Select SHR-2040/2041/2042 from the Contact list. - SHR-2040/2041/2042 turns black if contacted with the ADMIN authority and turns gray if contacted with the USER authority.
  • Page 136 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-25 SHR-2040/2041/2042 USER’S MANUAL Calendar Window - If the video data in on-line SHR-2040/2041/2042 was recorded, the date turns red. - If you click the date in red, the saved video information is displayed. - The currently selected date will be marked with a thick red box. - ¦¤: Moves to the previous month.
  • Page 137 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-26 @ Backup Button - If not playback(Stop), the video save button performs the backup function. - If the save button is pressed, the window for backup pops up. - Set a Start/End tome for backup and select a file format to save. - The backup starts when the “Start”...
  • Page 138 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-27 SHR-2040/2041/2042 USER’S MANUAL $ Print - This function outputs the screen zone of the playback video which is now being displayed. % Setup Mode Button - This button pops up the setup mode window. Play Buttons ! Play : Play @ Reverse Play : Reverse Play...
  • Page 139 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-28 Note Note During the play(Play/RevPlay/FF/FB), disconnection or change to the both monitor- ing mode and local mode is not permitted. Click the Stop button first before the change. Time Line - Displays the time information of video in SHR-2040/2041/2042 selected on the calendar window.
  • Page 140 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-29 SHR-2040/2041/2042 USER’S MANUAL Next Button - Changes the channel as the Next button does in the monitoring mode. Note Note During the video playback(Play/RevPlay/FF/FB), the channel change is not available. Reload Button - Updates the record time information in the calendar window and time line. Local Mode - Plays *.dvr file saved in the directory of your PC by the Record function.

  • Page 141: Setup Mode

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-30 Setup Mode Initial Screen ! Button to select items for DVR Setup, Viewer Setup, Site Setup, and S/W Version setup. @ It shows what the selected Setup item can set up in detail. # button to terminate the setup window. $ Button to save the information revised in the setup window, remark the information prior to such a revision, or terminate the setup window.
  • Page 142 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-31 SHR-2040/2041/2042 USER’S MANUAL Setup Item Selection Button - It is used for the selection of each setup item. - It is composed of 4 items- DVR Setup, Viewer Setup, Site Setup, and S/W Version. - DVR Setup: Allows you to change the remote menu setup items of SHR-2040/2041/2042.

  • Page 143: Dvr Setup

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-32 DVR Setup - Click the [DVR Setup] button for DVR Setup. - You can change remotely the setup items of SHR-2040/2041/2042 Menu, being connected with Smart Viewer. - DVR Setup is composed of 5 items; System, Camera/Audio, Monitoring, Recording, and Network.
  • Page 144 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-33 SHR-2040/2041/2042 USER’S MANUAL Detailed DVR Setup Items ! System - Information Information shows the information on on-line SHR-2040/2041/2042. SHR204X-V1.0.0-20050701080722 Note For the detailed items of DVR Setup, refer to Chapter 5. - Password Sets the password for the control of SHR-2040/2041/2042 Menu or SHR-2040/2041/2042 key input.
  • Page 145 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-34 Caution Caution System Password shall be composed of numeric only, up to 8 digits. Note Note - The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are not supported at the System Password input. - Use the BACKSPACE key to delete the contents.
  • Page 146 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-35 SHR-2040/2041/2042 USER’S MANUAL - Language Language sets the language in which on-line SHR-2040/2041/2042 will be expressed Note Note The change of language by the system language results in the change of language expression setup of SHR-2040/2041/2042. In short, the language setup of Smart Viewer does not change.
  • Page 147 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-36 - Remocon (Remote Control Device) Remocon can set the remote control device installed to SHR-2040/2041/2042. Note Note If you install the remote control device to the main body of SHR-2040/2041/2042 and activate the setup, PTZ control is not available in the Viewer. 9-36...
  • Page 148 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-37 SHR-2040/2041/2042 USER’S MANUAL @ Camera - Config. Config. sets Video, Audio On/Off, Camera Title, and Auto Sequence Time for each channel of on-line SHR-2040/2041/2042. Caution Caution - Only English is supported for the title. If you type in and apply the title in your native language, warning message pop sup to ask your retyping.
  • Page 149 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-38 - PTZ device It sets Camera ID, Protocol, Baud Rate, Parity, Data Bit, Stop Bit, and Serial Mode when connecting the dome camera to all the channels. # Monitoring - Monitoring It sets both the event monitoring and OSG display of the live mode. 9-38...
  • Page 150 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-39 SHR-2040/2041/2042 USER’S MANUAL $ Recording - Rec. Mode It sets the Video Size, Quality, and Rate values during the recording by the setting the recoding ON/OFF for the related channel in the live mode. NTSC 12.5 12.5...
  • Page 151 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-40 - Event Rec. It sets the Video Size, Quality, Rate, Pre Alarm, and Post Alarm values to be recorded when an event occurs. NTSC Note Note Full D1(L) Video Size does not support 15ips, 10ips(NTSC)/12.5ips, and 8.33ips(PAL) Rate.
  • Page 152 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-41 SHR-2040/2041/2042 USER’S MANUAL - Alarm Rec. It sets the information necessary for the alarm recording. Note Note More than one camera should be selected to apply the alarm. - Motion Rec. It sets the information necessary for the recording by the motion Detection. 9-41...
  • Page 153 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-42 - Video Loss Video Loss sets up the information on how to inform the user of Video Loss of SHR-2040/2041/2042. % Network - Password It sets the password for Admin and User when connecting with SHR-2040/2041/2042 through the network in Smart Viewer.
  • Page 154 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-43 SHR-2040/2041/2042 USER’S MANUAL Note Note - The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are not supported to the network password input. - Use the BACKSPACE key to delete the contents. Note Note - Default Admin Password is set to 654321.
  • Page 155 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-44 Callback - You can set the Callback function of SHR-2040/2041/2042. - In the event of Alarm, Motion Detection, or Video Loss, set the IP address and port of PC where SmartViewer is installed to forward Callback messages. In failure of message forwarding, set the value for retrial.

  • Page 156: Viewer Setup

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-45 SHR-2040/2041/2042 USER’S MANUAL Note Note - SHR-2040/2041/2042 uses 4 ports for TCP connection. - The PORT number is flexible and 4 consecutive numbers are grouped for the change ( 554,555,556,557 558,559,560,561 ) - If you use the IP Router for network composition, you should allocate a protocol for SHR-2040/2041/2042.
  • Page 157 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-46 Video Recording ! Naming - Being connected to SHR-2040/2041/2042 in the monitoring or search mode, you can save the video displayed with .dvr file and name it. - If you set to “Camera No. + Serial No.”, the file name depends on the camera number and serial number.
  • Page 158 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-47 SHR-2040/2041/2042 USER’S MANUAL Sequence Time - When connecting with SHR-2040/2041/2042 in the monitoring mode, set the auto sequence time if the auto sequence is set. The time can be set from 10 to 20 minutes. OSD Display - Sets if OSD shall be displayed on each channel of Smart Viewer.

  • Page 159: Site Setup

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-48 Site Setup - Click the [Site Setup] button for Site Setup. - The information of DVR(SHR-2040/2041/2042) or Site that you want to connect by Smart Viewer is set in the Site Setup. - Smart Viewer allows you to connect with DVR(SHR-2040/2041/2042) or Site registered only here.
  • Page 160 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-49 SHR-2040/2041/2042 USER’S MANUAL DVR List - The information of DVR(SHR-2040/2041/2042) that you want to connect by Smart Viewer is set in the DVR List. - You can register a new DVR(SHR-2040/2041/2042) or delete and edit the DVR(SHR-2040/2041/2042) selected from the registered list, and the name and IP / MAC Address of the registered DVR(SHR-2040/2041/2042) is displayed in DVR List.
  • Page 161 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-50 ! To add a new DVR(SHR-2040/2041/2042) - If you press the [New] button, the following window will pop up where you are able to add a new DVR(SHR-2040/2041/2042) information. 1. Network Modes - LAN - If DVR(SHR-2040/2041/2042) is connected to the LAN, set the network mode to LAN.
  • Page 162 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-51 SHR-2040/2041/2042 USER’S MANUAL 2.Network Modes - ADSL - If DVR(SHR-2040/2041/2042) is connected to the ADSL, set the network mode to ADSL. - If the ADSL connected to DVR(SHR-2040/2041/2042) uses Static IP, select Static IP in the Address Type and input the name and IP Address of DVR(SHR-2040/2041/2042).
  • Page 163 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-52 Note Note - The MAC address of DVR is written at the side label of the product. It is also found in the system information of DVR Menu. - If the DVR(SHR-2040/2041/2042) is connected to ADSL, the network bandwidth is low.
  • Page 164 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-53 SHR-2040/2041/2042 USER’S MANUAL # To Edit the old DVR(SHR-2040/2041/2042) - If you select a DVR(SHR-2040/2041/2042) in the DVR list to edit and press the [Edit] button, the following message box pops up. Press [OK] button to edit the DVR(SHR-2040/2041/2042).
  • Page 165 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-54 Site List - You can register and control the many DVRs(SHR-2040/2041/2042) to be connected with the smart viewer at once with a site in the site list. You are allowed to register a new site ,and delete or edit the selected site in the registered list.
  • Page 166 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-55 SHR-2040/2041/2042 USER’S MANUAL @ To delete an old site or DVR(SHR-2040/2041/2042) - If you select a site or DVR(SHR-2040/2041/2042) in the site list for deletion and press the [Delete] button, the following message box pops up. Press the [OK] button to delete either site or DVR(SHR-2040/2041/2042).
  • Page 167 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-56 - When the site to edit is connected with the Smart Viewer, the following message box pops up and the site cannot be edited. Be sure to cut the connection between the DVR(SHR-2040/2041/2042) and the Smart Viewer before you edit it.
  • Page 168 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-57 SHR-2040/2041/2042 USER’S MANUAL S/W Version - If you press the [S/W Version] button, the smart viewer version, system require- ments, and the version of DVR(SHR-2040/2041/2042) System S/W, being connected to the smart viewer, are displayed. - You can upgrade the on-line DVR(SHR-2040/2041/2042) System S/W remotely.
  • Page 169 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-58 Smart Viewer Version - Smart Viewer Version and system requirements are displayed. DVR Version SHR-2040/2041/2042 - DVR Version not only displays the connected DVR(SHR-2040/2041/2042) name if any DVR(SHR-2040/2041/2042) is being connected with Smart Viewer or the name of DVR(SHR-2040/2041/2042) composing a site if any DVR(SHR-2040/2041/2042) is being connected with the site but also displays DVR(SHR-2040/2041/2042) S/W version.
  • Page 170 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-59 SHR-2040/2041/2042 USER’S MANUAL @ Click the following button to open the “SHR-2040/2041/2042 Firmware” file in format. 2040/2041/2042 2040/2041/2042 # Press the [Upgrade] button to transmit a file to the selected DVR(SHR- 2040/2041/2042) and start the upgrade of DVR(SHR-2040/2041/2042) S/W. $ The progress of file transmission and upgrade is displayed at the bottom.
  • Page 171 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-60 Appendix...

  • Page 172: Product Specification

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-1 SHR-4160N/P USER’S MANUAL Product Specification Item Details Remarks 32bit RISC CPU Memory SDRAM : 128MByte Flash : 16 MByte Embedded OS Broadcasting NTSC System Input Voltage 2040-DC 12V, AC 110-220(NTSC), AC 110-230(PAL) 2041/2042 - AC 110-220(NTSC) AC 100-230(PAL) Power Consumption 2040 : 30Watt, 2041 : 60Watt, 2042 : 51Watt...
  • Page 173 NTSC : 1ips/3ips/5ips/7.5ips/10ips/15ips PAL : 1ips/2.5ips/5ips/6.25ips/8.33ips/12.5ips/25ips * Packing ATA HDD x 2(MAX) 120GB Internal -Primary/Secondary IDE Connector (Samsung) -MAX HDD Size : 250GB x 2 = 500Giga Byte x 1EA Storage USB HDD External Capacity -MAX 1 (Not support USB hub)
  • Page 174 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-3 SHR-2040/2041/2042 USER’S MANUAL Item Details Remarks Calendar Event - Normal, Schedule, Alarm, Motion, Video Loss Search Mode Date/Time Go to First Go to Last Backup Data Decoding Performance Video size Play Back Video size & 30ips(NTSC)/25ips(PAL) 30ips(NTSC)/25ips(PAL)/1CH Performance Half D1(N) 15ips(NTSC)/12.5ips(PAL) 15ips(NTSC)/12.5ips(PAL)/1CH...

  • Page 175: The Specification Of Hdd And Peripheral Device

    Internal ATA HDD/IEEE1394/USB HDD I/F External HDD Maker RPM Capactity Interface Buffer Series Name Model No Remark SV12.03N Attached model i n shi p ment 120 GB 2MB SpinPoint V80 Samsung 5,400 Ultra ATA-133 SV1604N 160 GB 7,200 6Y120LO 120 GB DiamondMax Plus 9 Ultra ATA-133...

  • Page 176: Outline Drawings

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-5 SHR-2040/2041/2042 USER’S MANUAL Outline Drawings [SHR-2040] [SHR-2041] 10-5...
  • Page 177 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-6 [SHR-2042] 10-6...

  • Page 178: Factory Default

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-7 SHR-2040/2041/2042 USER’S MANUAL Factory Default This restores the Network information and preset values in SHR-2040/2041/2042 to the original state at the time of factory shipment. Factory Default will be done as follows; - Use System / Load Factory Default in MENU or, - If you hold on to the Mode button in Live Mode and keep pressing the CH5 button for 5 seconds, the system will return to the Factory default condition.
  • Page 179 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-8 Classification Detailed Items Factory Setup Duration Event Monitoring Date OSD Display Time Monitoring Title Status Spot Out Channel Spot Out Event Monitor Monitor Out Composite Out 1CH DVR Support Mode Record Mode Video Size Setup Quality Normal...

  • Page 180: Frame Specification For The Playback

    SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-9 SHR-2040/2041/2042 USER’S MANUAL SHR-2040/2041/2042 Smart Viewer Frame Specification for the Playback NTSC FRAME Viewer Screen VIDEO SIZE RATE Split Mode Half D1(N) CIF (C) Nine-split 1 frame/sec 15 frame/sec Fore-split 15 frame/sec 15 frame/sec Single 15 frame/sec 15 frame/sec...
  • Page 181 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-10 FRAME Viewer Screen VIDEO SIZE RATE Split Mode Half D1(N) CIF (C) Nine-split 1 frame/sec 12.5 frame/sec 12.5 Fore-split 12.5 frame/sec 12.5 frame/sec Single 12.5 frame/sec 12.5 frame/sec Half D1(N) CIF (C) Nine-split 8.33 frame/sec 8.33 frame/sec 8.33 Fore-split...
  • Page 182 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-11 SHR-2040/2041/2042 USER’S MANUAL Troubleshooting(FAQ) 1. The system power is dead and LED in front of the system does not operate at all. - Please check the power connection. - Check the power voltage. - If all your efforts like above end up with nothing, check or exchange the power supply.
  • Page 183 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-12 7. The channel button does not operate in Live. - If the current screen is Event Monitoring, the channel button does not operate. Then, press the Alarm button to terminate the current screen and select a channel. 8.
  • Page 184 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-13 SHR-2040/2041/2042 USER’S MANUAL 13. Smart Viewer in operation is disconnected. - If you change time, network setup, HDD format, Default Setup, or HDD attachment or detachment for SHR-2040/2041/2042 DVR, the current Smart Viewer will be automatically disconnected. - Check network connection.
  • Page 185 SHR-2040/2041/2042-ENG-1 2005.6.29 2:36 PM Page 1...
  • Page 186 SHR-2040/2041/2042-ENG-1 2005.6.29 2:36 PM Page 1...
  • Page 187 SHR-2040/2041/2042-ENG-1 2005.6.29 2:36 PM Page 1...
  • Page 188 SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 10-14 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

This manual is also suitable for:

Shr-2041Shr-2040

Table of Contents