Figure 31 - S.m.a.r.t. Setup Screen - Samsung SHR-3091 User Manual

User' s Manual
The °C field displays the temperature of the storage device.
The Usage field displays the device usage.
NOTE: When the device is an IDE hard disk drive, you can change its usage to either
Rec. On or Rec. Off. When the device is a SCSI hard disk drive, you can change its
usage to either Extension or Archive.
CAUTION: A "–" displays when connecting a hard disk drive that was
previously used for something else. In this situation, device usage can be
changed as desired usages; e.g., Extension to Archive or Archive to Extension.
However, data on the device will be lost if the device usage is changed.
The DVR can be set to react to storage problems by activating an internal buzzer or external
alarms, and/or notifying a remote site. Highlight the box beside Storage Problem Action:
Alarm Out / Notify and press the
button to select from Beep, the alarm output terminal that
you want to associate with the storage problem event, and/or Notify.
Highlight S.M.A.R.T. Setup... and press the button. The S.M.A.R.T. Setup screen
appears.
Figure 31 — S.M.A.R.T. Setup screen.
Your DVR shows the condition of the hard disk drives if the installed IDE hard disk drives
support the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) program.
Highlight the box beside Use. Press the button to toggle between On and Off.
The Last-check field displays the date and time information of the last storage check.
Highlight the box beside Period, and select from Daily, Weekly or Monthly for the check
interval.
26