Samsung SHR-5082 User Manual
Real time dvr
Hide thumbs
Also See for SHR-5082:
- Gebruikershandleiding (109 pages) ,
- User manual (109 pages) ,
- Specification sheet (3 pages)
Table of Contents
Advertisement
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at
the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product
should not be mixed with other commercial wastes for disposal.
SHR-5162_Eng.indb
44
(Waste Electrical & Electronic Equipment)
Code No. AB68-00644A-00
Real Time DVR
user manual
imagine
the possibilities
Thank you for purchasing a Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/global/register
SHR-5082
SHR-5162
2007-06-18
ｿﾀﾀ・11:46:52
Advertisement
Table of Contents
Related Manuals for Samsung SHR-5082
Summary of Contents for Samsung SHR-5082
-
Page 1: User Manual
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at Thank you for purchasing a Samsung product. the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,... -
Page 2: Key Features Of Your Dvr
key features of your DVR The Digital Video Recorder (DVR) compresses the acquired images of 8/16 video channels from cameras using MPEG-4 technologies, and compresses the 4 channel audio inputs into ADPCM audio file in real time to record them on the hard disk or retrieve them from the hard disk simultaneously. In addition, it transfers the video and audio data through a network in real time and allows you to remotely monitor them using your PC. -
Page 3: Safety Regulations
safety regulations Please be sure to keep the following in mind for the right use of the product to prevent proprietary risk or damage. Do not use multiple plugs at once. This may cause abnormal heat generation or fire ... -
Page 4: Before Start
You may download open source codes from the following website: http://www.samsung.com. Before installing any external device such as external memory or HDD, please check the compatibility of the device with Samsung DVR. The list of the compatible devices with Samsung DVR can be obtained from your vendor. -
Page 5: Table Of Contents
contents continued next page INTRODUCING YOUR REAL Controls on the DVR Rear panel jacks TIME DVR Remote control INSTALLATION Checking installation environment Hdd addition CONNECTING WITH OTHER Connecting video, audio, and monitor DEVICES Connecting the network Connecting the USB Connecting the alarm input/output Connecting the RS-485 device LIVE Operating the system... - Page 6 SEARCH AND PLAY Before use Calendar search Event search Date time search Go to first search Go to last search Backup search Playback Smart Viewer Introduction Main features PC specification (recommended) Smart Viewer installation Smart Viewer program execution Smart Viewer initial screen Setup mode Monitoring mode Search mode...
-
Page 7: Controls On The Dvr
introducing your real time DVR CONTROLS ON THE DVR 5082 5162 1. ALARM LED Lights when an event occurs. HDD LED Lights when the hard disk is operating. When the HDD is accessed, LED repeatedly blinks. NETWORK LED Lights when the data is transferred through the network. BACKUP LED Lights when a backup is in progress. - Page 8 REC Button Starts or ends the recording (Fast/Step Rewind) Button - Step Rewind: Used for backward scene-by-scene search while at pause. - Fast Rewind: Used for quick backward search while in play. (-x2, -x4, -x8, -x16, -x32, -x64) (STOP) Button Ends search while in play.
-
Page 9: Rear Panel Jacks
REAR PANEL JACKS 5082 REAR 5162 REAR VIDEO OUT Composite video output port (BNC type connector) AUDIO OUT Audio output port (RCA jack) VGA video output port S-VIDEO S-VIDEO video output port NETWORK Network connection port AUDIO IN Audio input port (RCA jack) SPOT1: 1 channel exclusive SPOT output SPOT SPOT2: The same output as the Main VIDEO OUT (OSG is not displayed) -
Page 10: Remote Control
REMOTE CONTROL 06_ introducing SHR-5162_Eng.indb 2007-06-18 ｿﾀﾀ・11:47:08... - Page 11 introducing _07 SHR-5162_Eng.indb 2007-06-18 ｿﾀﾀ・11:47:09...
-
Page 12: Installation
For the product with an input ground, use a power plug with a ground pin. CHECKING INSTALLATION Please keep the following instructions for rack- mounting the Samsung DVRs to proceed with ENVIRONMENT the installation. Samsung Digital Video Recorder (hereinafter 1. -
Page 13: Hard Disk
The jumper setting method is illustrated on the for missing data or defects caused surface of the purchased HDD. by the user’s mishandling. Using SAMSUNG hard disk, the jumper setting Note: Adding Extra HDD. Check method is as follows: in advance that the HDD ... - Page 14 3. There are brackets (Bracket-HDD) mounted on the right and left sides where you can mount HDDs. Remove the screws holding each bracket to mount an HDD onto. BRACKET- HDD(B) 5. To add a hard disk, the built-in HDD (Primary Master) should have been installed.
- Page 15 6. To add another hard disk after adding a hard 8. When adding hard disks completes, connect disk completes, remove the Bracket-HDD(B) the power supply cable, signal transmission on the DVD-RW driver. cable (IDE Cable), and fan cable to the hard disks.
-
Page 16: Connecting With Other Devices
connecting with other devices The illustrations are described based on SHR-5162. CONNECTING VIDEO, AUDIO, AND MONITOR CONNECTING THE NETWORK Connecting to Internet through Ethernet (10/100BaseT) 12_ connecting SHR-5162_Eng.indb 2007-06-18 ｿﾀﾀ・11:47:55... -
Page 17: Connecting The Usb
Connecting to Internet through ADSL CONNECTING THE USB CONNECTING THE ALARM INPUT/OUTPUT 1. There are two USB connecting ports on the front and rear panels of the product. The Alarm IN/OUT ports on the rear of the product have the following elements: 2. -
Page 18: Connecting The Rs-485 Device
CONNECTING THE RS-485 DEVICE You can connect an RS-485 device through a rear port of the product. For example, you can connect and control PTZ cameras supporting the RS-485 communication. You can also adopt either Half Duplex or Full Duplex method for exchanging data. PTZ device Rear Half Duplex Type... -
Page 19: Live
OPERATING THE SYSTEM LIVE SCREEN MODE Live screen icons Turn on the power and the following Samsung logo appears. The live screen icons display the status of current setup or function. Upon completion of initializing procedure, the live screen appears with a beep sound. (It takes CAM_01 about one minute until a live screen comes up.) - Page 20 To see each mode in not sufficient when recording. order, repeatedly press the MODE button on the front panel or remote control. But the SHR-5082 model has no 16-split mode. CAM_01 CAM_02 CAM_03 CAM_04 CAM_01...
-
Page 21: Setting Audio On/Off
On or Off. The initial live screen shows the 16-split screen Depending on the audio On/Off setting condition, mode at first. The SHR-5082 model starts from the Audio icon of the selected channel changes the 9-split mode. -
Page 22: Freezing And Zooming
Audio On/Off setting in 4, 6, 7, 8, and 9-split modes and PIP mode As in 16-split mode, when pressing the ENTER button in 4, 6, 7, 8, and 9-split modes and PIP mode, the selection cursor appears for you to select a channel. -
Page 23: Spot-Out Monitoring
SPOT-OUT MONITORING If the built-in HDD is not connected or it is out of order, the system CAUTION Spot-out monitoring has nothing to do displays an error ( ) saying “built- with the live screen output. It monitors a in HDD error”... -
Page 24: Menu Setup
menu setup BEFORE USE SEARCH, COPY, PTZ, POWER buttons in Live mode To perform the search, backup, PTZ controls, The menu structure is as follows: or shutdown function, press the following button in Live mode. Then the window asking for an ID and password appears for user MENU SETUP validation. - Page 25 [Date/Time Change] After the date and time has been CAUTION Password changed, the data recorded before the change can be removed. For Admin Password New Password Confirm example, if the current time is Password Lock changed from 8 to 7, all the data Record Lock recorded between 7 and 8 will be User Password...
-
Page 26: Load Factory Default
Load Factory Default Time Change Changes the Date/Time. Load Factory Default Initializes the system. It is used to initialize all the settings to the factory default values. The recorded video data will not System Upgrade Changes the system S/W. be removed. Select OK to start initialization. Disk Full No Space in the HDD MENU SETUP... -
Page 27: Storage Setup
System Information and Setup Disk End Mode - Stop: Stops recording when the disk is full while recording is still in progress. - Overwrite: Deletes the previously recorded data System Information and Setup to store new data when the disk is full during System Information recording. - Page 28 This is used for external HDD connection. The external HDD is connected through this USB port on the front or rear panel. This menu enables you to use the Samsung system keyboard or remote control. Export/Import the Configuration Device...
-
Page 29: Camera
PTZ and auto sequence are not allowed for device using the remote control. the channel whose video is set to Off. In case of SHR-5082, only 8 channels CAMERA are displayed. The detailed items for camera menu are as ... -
Page 30: Monitoring
Tech. assigned for each item of the selected channel. Baudrate Available baud rates are 600, 1200, 2400, In case of SHR-5082, only 8 channels are 4800, 9600, 19200, and 38400. displayed. Parity Select one of None, Even, and Odd. -
Page 31: Record Mode
OSG Display [Video Out] - Date: The date is displayed on the screen You may experience low display when it is set to On. CAUTION quality while the dual video output is - Time: The time is displayed on the screen in use. -
Page 32: Event Record Duration
- If the resolution is set to Half D1 and the number of Video On cameras is 5 to 8, the IPS limit is 7.5 ips for NTSC) and 6.2 ips In case of SHR-5082, only 8 channels are for PAL. displayed. -
Page 33: Event Record Mode
It is used to set the Alarm-Out duration. When an alarm occurs, the alarm is output for the preset time. You can select any of Off, 3sec, 5sec, 10sec, 20sec, 30sec, and Continuous. In case of SHR-5082, only 8 channels are displayed. menu setup _29 SHR-5162_Eng.indb 2007-06-18 ｿﾀﾀ・11:48:28... -
Page 34: Schedule
You can select any of Off, 3sec, 5sec, 10sec, 20sec, 30sec, and Continuous. Continuous Recording Event Recording In case of SHR-5082, only 8 channels are Holiday Cancel Both(Continuous, Event) displayed. -
Page 35: Network
Connection Mode In case of SHR-5082, only 8 channels are Select a network type that is connected to the displayed. main body of the product. - Static IP: When the main body is connected Alarm Out Schedule to the network using the static IPs. -
Page 36: Transfer Protocol Settings
If you select Off, the IP will not be connected to the product. Please registered in DDNS. contact the network manager or - If you select Samsung DDNS, register ADSL company personnel to get the the TCP IP in DDNS that is operated by correct setting values. - Page 37 Transfer Video Loss: Set it to On to display If you set up the public DDNS (dyndns. video loss events on Smart Viewer. com, no-ip.com, or changeip.com), it will Transfer System Log: Set it to On to display take approximately 30 to 60 seconds system logs such as critical system failures.
-
Page 38: Configuring Network
CONFIGURING NETWORK In case of UDP transfer protocol The TCP ports will be used for Smart Viewer Port configuration for connecting connection and the UDP ports will be used for Smart Viewer stream transfer. When Multicast is set ... -
Page 39: Backup
DVR can be obtained from your vendor. The backup of the AVI format may take longer depend on a number of the channel and the DVR operation environment (e.g. recording, network) In case of SHR-5082, only 8 channels are displayed. backup _35 SHR-5162_Eng.indb 2007-06-18... -
Page 40: Ptz Camera Control
Half Duplex Press the PTZ button in the live mode to cancel the PTZ camera control function. In case of SHR-5082, only 8 channels are After cancellation, the PTZ sign on the Auto displayed. Sequences to white from yellow. -
Page 41: Preset Setup
PTZ control. 1. Press the PRESET button on the front panel or remote control in Single Screen PTZ Only the Pan. and Samsung protocol cameras are authorized for this setup. Camera Control Mode ad select Preset. To move to the menu screen, press the PRESET... -
Page 42: Preset View
OTHER VIEW Press the VIEW button on the front panel or remote control in Single Screen PTZ Camera Control Mode to use other viewing controls. Samsung, Pan., Pel.-P, and Pel.-D protocol PTZ cameras support the following operations: Auto Pan Scan... -
Page 43: Recording
RECORD button again. If the recording stops, set together with the schedule recording. the REC LED goes out. If the work that needs to stop the In case of SHR-5082, only 8 channels are recording (time change, file deletion, displayed. WARNING HDD connection/disconnection, etc.) -
Page 44: Search And Play
Event Search (Can Select 1 Event) Date/Time Event Mode Cancel First Prev Next Last Start Cancel In case of SHR-5082, only 8 channels are In case of SHR-5082, only 8 channels are displayed. displayed. 40_ search & play 40_ search & play SHR-5162_Eng.indb 2007-06-18 ｿﾀﾀ・11:49:15... -
Page 45: Date Time Search
This function is used to search the video images for the specific time you want. Up to 16 channels Start 9-16 Cancel can be searched at once. In case of SHR-5082, only 8 channels are Date/Time displayed. Cam. Start Date/Time End Date/Time... -
Page 46: Go To Last Search
Next to move to the corresponding Start Cancel 9-16 page. In case of SHR-5082, only 8 channels are AVI-format backup files cannot be displayed. played back on this DVR but only the CAUTION PC Media Player can play the files. - Page 47 Playback mode can set the location of the play channel from You can change the screen display method the menu. using the MODE button and NUMERIC Speed play buttons as shown in the figure. The 16-split, To play the recorded images at a faster speed, 12+1 split, and 15+1 split screens are shown press the Fast Forward () or Fast Rewind only in SHR-5162.
-
Page 48: Smart Viewer
Smart Viewer INTRODUCTION Smart Viewer INSTALLATION Smart Viewer is a program to be installed on 1. Insert the Smart Viewer program CD into the your PC. Using this program, you can monitor CD ROM drive. the video and audio data in real time through the 2. -
Page 49: Smart Viewer Program Execution
5. After reading the license agreement, click 8. When installation is complete, click Finish to Yes to proceed to next step. exit from the process. 6. Set the destination folder to install the Smart Viewer program and click Next. Smart Viewer PROGRAM EXECUTION Double-click the Smart Viewer icon on the Desktop to execute the program. -
Page 50: Smart Viewer Initial Screen
Smart Viewer INITIAL SCREEN 1. This screen shows the monitoring sites. 12. These buttons enable you to perform the PTZ-related operations. 2. Using these buttons, you can enter the Search mode in which you can search 13. These buttons display the status of the and play the remote video file that has current channels. -
Page 51: Dvr Setup
1. These buttons enable you to select setup You can access to DVR Setup with the items for DVR Setup, Viewer Setup, Site Admin privilege. The button will not be Setup, and S/W Version. activated when you are connected to the DVR with a user privilege. - Page 52 If you change the values for date and For more details, see Chapter 5, “Menu time, the DVR automatically disconnects Setup.” the communication with Smart Viewer - Admin Password to apply the settings. You can change the Admin password ...
- Page 53 - Storage Setup - Remote Control Device It displays the information of the HDD that You can configure the settings for the is contained in your DVR. Also you can remote control that is installed in the DVR determine whether or not to repeat recording system.
- Page 54 The Delete key and key combinations like CTRL+C and CTRL+V in the keyboard are not supported for input of camera title. For deletion of any input value, use the BACKSPACE key. - PTZ Device You can configure the settings for PTZ cameras, which include camera ID, protocol, baud rate, parity, data bit, and stop bit.
- Page 55 - Video Loss Setup It configures the video loss related settings. - Alarm Detection Setup It configures the settings for alarm recording. Schedule You can configure schedule-related settings. For more details, see Chapter 5, “Menu Setup.” - Record Schedule You can change the schedule recording- related settings.
- Page 56 Network Be sure to inquire of the network manager about the settings. You can configure the network-related settings. CAUTION Both ADSL ID and password can For more details, see Chapter 5, “Menu Setup.” be input up to 40 letters including - Network Password alphabets, numbers, and special You can set both Admin password and user...
-
Page 57: Viewer Setup
Viewer Setup - Recording Time You can set the maximum recording time when saving the video data. You can set the time Click Viewer Setup for configuring the Smart ranging from 1 to 10 minutes. If the recording Viewer related settings. This Viewer Setup time exceeds the preset value, the program consists of 5 different items: Video Recording, stops recording. -
Page 58: Site Setup
Language DVR List You can set the language to be displayed on Smart Viewer. Site Setup The DVRs that you want to connect using Click Site Setup for configuring the site-related Smart Viewer are listed in DVR List. You can settings. - Page 59 If you have selected Use DDNS in the Network Settings menu of DVR or used an IP splitter to register a URL using DDNS, you can connect through the designated URL. If you want to connect through the URL, select URL in Address Type and enter the URL set in URL.
- Page 60 The site name can be input in both English and Korean up to maximum 10 letters. To delete an existing site or DVR, use Delete. To add a DVR to the site, select a DVR and click Add. After selecting a site or DVR and click Delete, the following message appears.
-
Page 61: Monitoring Mode
You can download the upgraded DVR firmware from the CCTV part at www. The progress of the upgrade is displayed at the samsung.com. bottom of the screen. MONITORING MODE To connect a DVR or site, select a DVR or site from the list and click the connection button as shown in the picture. - Page 62 If you change the settings such as video size and color quality while CAUTION Smart Viewer is running, Smart Viewer may fall into an unexpected state. In this case, you must terminate Smart Viewer. Mode Conversion Button If the network password of a DVR differs from the connection password set in Smart Viewer, a login message appears to let you input the These buttons enables you to switch between...
- Page 63 3. When audio signal is available, the audio The displayed events are: mark appears. Connecting..: When trying to connect to a DVR is in progress. 4. It displays whether the PTZ controls are Connected..: When connection is active. made to a DVR.
- Page 64 Camera Connection Indication Monitoring State Display Window The screen split status and playing status are displayed on the screen. : When monitoring in Quad Mode The window displays the connection state of DVR and the connected cameras. Yellow: When Smart Viewer is successfully connected to a DVR.
-
Page 65: Next Button
NEXT Button FAVORITE Button When this button is clicked, next screen follows. If you press this button, the favorite window is In Single Mode, the channel numbers are activated. sequentially switched from 1 to 16. In Quad (4-split) Mode, the screens are changed like 1st 4 channels (1,2,3,4) -->... - Page 66 The PTZ (Pan/Tilt/Zoom) controls are available in all cameras. But, this Power Zoom controls are supported by Samsung smart dome cameras only, and they support the tilting operation below 45°. You can adjust the audio volume level (0 to 10) of a channel or mute it.
- Page 67 1. You can configure the camera-related some product. settings using the PTZ camera menu. Samsung cameras support those functions. In case of Panasonic cameras, the names of AUTOPAN, SCAN, and PATTERN are as following: 2 SEQUENCE 3 AUTOPAN 4 SORT.
-
Page 68: Search Mode
SEARCH MODE The Search mode has two separate modes such as Remote mode to search/play the DVR video data, and Local mode to play the DVR files that have been saved in the designated directory on your PC. 1. The screen shows the playback channels. 12. - Page 69 Remote Mode Screen Split Selection Buttons This mode transfers the video data recorded on You can use any of full screen, single, quad DVR through the network for playback. Up to 4 (4-split), 9-split, and 16-split modes. channels are allowed for simultaneous search and playback.
- Page 70 2. File Conversion button When this button is clicked, the system converts a DVR file into JPEG or AVI format. To perform this function 4. Setup Mode button a. Click Open to select a DVR file to be This button brings up the Setup Mode converted.
- Page 71 6. Time Line 7. Next button It displays the recorded video data status on DVR after a date is selected. The normal mode displays the time ranging from 0 to 24 O’clock while the extension mode displays It operates the same as the Next button in the Monitoring mode.
-
Page 72: Appendix
appendix PRODUCT SPECIFICATION Specs Details Notes Operating System Embedded OS Broadcasting NTSC / PAL System AC 100 ~ 230V (PAL) Input Voltage AC 110 ~ 220V (NTSC) Power Usage Composite 16(8) Channel Video Video Input - 1.0Vp-p - 75Ω Hi Z Termination BNC Type Loop Through Out 16(8) Channel - Auto Termination... - Page 73 Specs Details Notes Recording Compression Video : MPEG4 Method Audio : ADPCM Resolution & Recording Highest Image Recording Specs Resolution Recording Speed Specs (Picture quality) CIF(C) Level8(High) 30ips(NTSC)/ 352X240(NTSC) ~ Level1(Low) 25ips(PAL) /352X288(PAL) Half D1(N) Level8(High) 30ips(NTSC)/ 720X240(NTSC) ~ Level1(Low) 25ips(PAL) /720X288(PAL) Recording...
- Page 74 Specs Details Notes Display Mode Single 1Channel Decoding 16 split (played cameras10-16) 9 split (played cameras 5-9) 4 split (played cameras 2-4) PIP 1 Channel Decoding + 1Channel Live Triplex 9 split 8 Channel Live + 1Channel PB Triplex 16 split ...
-
Page 75: Outline Drawings
OUTLINE DRAWINGS 5082 Outline Drawings appendix _71 SHR-5162_Eng.indb 2007-06-18 ｿﾀﾀ・11:50:31... - Page 76 5162 Outline Drawings 72_ appendix SHR-5162_Eng.indb 2007-06-18 ｿﾀﾀ・11:50:38...
-
Page 77: Factory Default
Record Lock HDD Mode HDD repeat record Overwrite HDD ending alarm Camera Config Video Camera Setup Audio Title CAM_01 to CAM_16 (SHR-5082 : 8) Auto Seq. 5 sec PTZ Device Camera No. Protocol None Baudrate 9600 Parity None Data Stop... - Page 78 Classification Detailed Items Factory Setup Monitoring Event Monitoring Duration Date Time OSD Display Title Status Spot Out Channel Spot Out Event Monitor Monitor Out Dual Out Play channel location Lower right-hand corner Multi-channel change 5 seconds Record Mode Record Quality & Auto Normal Quality Level4 Setup...
-
Page 79: Factory Setup
Classification Detailed Items Factory Setup Connection Mode Static IP Bandwidth 2Mbps Admin Password 4321 User Password 4321 192.168.001.200 IP Settings Gateway 192.168.001.001 Subnet Mask 255.255.255.000 168.126.063.001 ADSL User ID Password Protocol type Port(TCP) 554.555.556.557 Port(UDP) 8000-8159 Unicast / Multicast Unicast Multicast IP 224.126.063.001 Network... -
Page 80: Troubleshooting (Faq)
TROUBLESHOOTING (FAQ) PROBLEM SOLUTION The system power is dead and Please check the power connection. LEDs on the front of the set do not Check the power voltage. operate at all. If all your efforts as above end up with nothing, check or exchange the power supply. - Page 81 PROBLEM SOLUTION Alarms keep continuously issued Press the MENU button and do the following: so you cannot cancel using the 1) To cancel Event Monitoring: Monitoring > Event ALARM button. Monitoring Duration Off 2) To cancel Buzzer: Event Record > Alarm (Motion Detection/Video Loss) >...
- Page 82 HDDs. The list of the compatible devices with Samsung DVR can be obtained from your vendor. The connection status is not shown Make sure that the external storage device installed is...
-
Page 83: Open Source License Report On The Product
OPEN SOURCE LICENSE REPORT ON THE PRODUCT This product uses software provided under the name of GPL and LGPL. You can receive the following GPL and LGPL source codes by email request to www.sec.co.kr. GPL Software Kernel, Busybox, Sysvinit, dvd+rw-tools, cdrtools, dosfstools ... - Page 84 constitute a work based on the Program rights or contest your rights to work written (independent of having been made by running entirely by you; rather, the intent is to exercise the Program). Whether that is true depends on the right to control the distribution of derivative or collective works based on the Program.
- Page 85 otherwise to copy, modify, sublicense or and a licensee cannot impose that choice. distribute the Program is void, and will This section is intended to make thoroughly clear automatically terminate your rights under this what is believed to be a consequence of the rest License.
- Page 86 REPAIR OR CORRECTION. If the program is interactive, make it output a short notice like this when it starts in an 12. IN NO EVENT UNLESS REQUIRED BY interactive mode: APPLICABLE LAW OR AGREED TO IN WRITING Gnomovision version 69, Copyright (C) year WILL ANY COPYRIGHT HOLDER, OR ANY name of author Gnomovision comes with OTHER PARTY WHO MAY MODIFY AND/OR...
- Page 87 and change free software to make sure the General Public License. We use this license for software is free for all its users. certain libraries in order to permit linking those libraries into non-free programs. This license, the Lesser General Public License, applies to some specially designated software When a program is linked with a library, packages--typically libraries--of the Free Software...
- Page 88 a notice placed by the copyright holder or other be licensed at no charge to all third parties authorized party saying it may be distributed under the terms of this License. under the terms of this Lesser General Public d) If a facility in the modified Library refers to a License (also called “this License”).
- Page 89 of the code of the Library into a program that is containing portions of the Library, and distribute not a library. that work under terms of your choice, provided that the terms permit modification of the work for 4. You may copy and distribute the Library (or the customer’s own use and reverse engineering a portion or derivative of it, under Section 2) in for debugging such modifications.
- Page 90 executable. reason (not limited to patent issues), conditions are imposed on you (whether by court order, It may happen that this requirement contradicts agreement or otherwise) that contradict the the license restrictions of other proprietary conditions of this License, they do not excuse libraries that do not normally accompany the you from the conditions of this License.
- Page 91 Foundation. be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can 14. If you wish to incorporate parts of the do so by permitting redistribution under these Library into other free programs whose terms (or, alternatively, under the terms of the distribution conditions are incompatible with...
-
Page 92: Openssl License
OpenSSL LICENSE * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING * Copyright (c) 1998-2006 The OpenSSL Project. NEGLIGENCE OR OTHERWISE) All rights reserved. * ARISING IN ANY WAY OUT OF THE USE OF * Redistribution and use in source and binary THIS SOFTWARE, EVEN IF ADVISED forms, with or without... - Page 93 “This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-). * 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:...