Connection To Component Video Out - Panasonic Diga DMR-EX80S Operating Instructions Manual

Connections
Before connection, turn off
all equipment and read
the appropriate operating
instructions.
The properties of the COMPONENT VIDEO
input terminal depend on the television or
screen.
Rear panel television
COMPONENT VIDEO input
Y
B
2
LNB
IN
Y
B
COMPONENT VIDEO OUT
1
Antenna cable
(not provided)
Televisions with LCD or plasma screen
If your TV supports the progressive process, select the setting [Progressive - On] in the Setup menu.
Conventionell televisions
With a conventionell television, progressive output can cause the picture to flicker, even if the television is progressive-
compatible. Select the setting [Progressive - Off].

Connection to COMPONENT VIDEO OUT

The COMPONENT VIDEO OUT terminal can be used for Interlace or Progressive
output and delivers a clearer picture than the S VIDEO OUT terminal.
Connections via these terminals produce the colour difference signals (P
the brightness signal (Y) separately. Colours can be reproduced true to the original
colour.
Connect the satellite dish to LNB IN of the DVD Recorder.
1
Connect the COMPONENT VIDEO OUT terminals (Y, P
2
with the COMPONENT VIDEO input of the television.
Connect the AUDIO OUT (L/R) of the DVD Recorder with the audio input of the
3
television.
Connect the DVD Recorder and the television to the power supply system.
4
After completing the above connections, the DVD Recorder proceeds with the
Automatic Setup.
Audio input R/L
YUV
3
Component cable
Y Green
P Blue
B
P Red
R
LNB
OUT
COMMON
INTERFACE
AV1(TV)
AV2 (EXT)
18
Audio cable
R Red
L White
AV OUT
OPTICAL
DIGITAL AUDIO OUT
VIDEO S VIDEO
(PCM/BITST EAM)
AC mains supply
(AC 220 V - 240 V, 50 Hz)
64
, P ) of the DVD Recorder
B R
4
AC mains lead
Rear panel DVD Recorder
AC IN
4
AC mains lead
D D
/P ) and
B R
64
13