Timer Recording Via External Units - Panasonic Diga DMR-EX80S Operating Instructions Manual

FUNCTION MENU
Setup
AV2 Settings
AV2 Input
Ext Link
Tuning
Disc
Picture
Ext Link
Sound
Display
Ext Link 1
Connection
Ext Link 2
Others
SELECT
OK
RETURN

Timer Recording via external units

Settings for external units (EXT LINK)
You control the recording function via an external unit (e.g. a receiver) with EXT LINK.
RGB / Video
Connect the external unit with a 21-pin Scart cable to the AV2 terminal.
Ext Link 2
Press FUNCTION MENU, select [To Others] with
Select [Setup] with
Select [Connection]
Select [Ext Link] with
Select [Ext Link 1] or [Ext Link 2] with
Press EXIT to return to the television picture.
Ext Link 1: for digital receivers sending a special recording control signal, e.g. the
F.U.N. receiver (TU-DSF41).
Ext Link 2: external recording control for satellite or digital receivers (video signal).
The Ext Link 2 cannot be used for an input signal in NTSC format.
Recording programming on the external unit
The Timer Recording is programmed on the external unit. Please read the operating
instructions for the external unit.
Switch the DVD Recorder to recording standby
Select the recording drive DVD or HDD with DRIVE SELECT.
Press EXT LINK.
Recording standby mode for EXT LINK controlled recordings is activated.
The display shows the selected drive and EXT-L.
The recording begins on receiving an appropriate signal from the connected unit.
The selected drive records the video picture for as long as it is being transmitted by
the external unit.
The start of the recording may possibly not be recorded correctly.
Switching off recording standby mode
Press EXT LINK to switch off the recording standby mode.
EXT-L disappears from the display.
Prematurely stop recording
Stop the transfer of the recording signal on the external unit.
Press EXT LINK to switch off the recording standby mode.
EXT-L d isappears from the display.
Playback during EXT LINK on the selected drive
Press DIRECT NAVIGATOR.
Select the title with
Playback starts.
Press STOP or DIRECT NAVIGATOR to stop playback.
Press RETURN or EXIT to leave the DIRECT NAVIGATOR.
and press OK.
with and [AV2 Settings] with
and confirm with OK.
and confirm with OK.
and press OK.
and press OK.
and press OK.
47