Connection; Hdmi Settings - Panasonic Diga DMR-EX80S Operating Instructions Manual

FUNCTION MENU
TV Aspect
Setup
Progressive
TV System

HDMI Settings

Tuning
Disc
AV1 Output
Picture
AV2 Settings
Sound
Common Interface
Display

Connection

SELECT
Others
OK
Playback of a film in 16:9 on
a conventionell TV set (4:3).
[Pan & Scan] [Letterbox]
The sides are cut off. Black bars at the
top and bottom.
TV Aspect
Setup
Progressive
TV System
HDMI Settings
Tuning
Disc
HDMI Video Format
Picture
Aspect for 4:3 Video
Sound
Digital Audio Output
Display
VIERA Link
Connection
Others
OK
[4:3] Picture output [16:9] Picture is
as original aspect. output with side
panels.
64
To Others
Connection
16:9
Off
TV Aspect
PAL
Select the TV screen format of your television.
Pan & Scan: The sides are cut off.
Video
Letterbox: Black bars appear at the top and bottom of the screen.
Progressive
TAB
On: The signal is displayed in full picture quality using COMPONENT VIDEO
RETURN
OUT.
The AV1 Output cannot be changed over to [RGB 1/2 ( without component )].
Select [Video ( with component )].
If the unit is connected to the television set using the S VIDEO OUT or the AV1
terminal, the output is in the Interlace process regardless of the settings.
Progressive cannot be selected if the unit is connected with the HDMI cable.
Television picture in the Progressive setting
The Progressive picture format is set to 16:9. DVD-Video can be displayed
perfectly with a picture format of 16:9. However, video material with a picture
format of 4:3 is stretched to the right and left. If your television can adapt the
picture format for Progressive pictures, select the [On] setting.
TV System
PAL: The unit is connected to a PAL or multi-system television: programmes
recorded with NTSC are played as PAL60.
NTSC: The unit is connected to an NTSC television: programmes recorded with
NTSC are played as NTSC.
16:9
HDMI Settings
Off
PAL
HDMI (High Definition Multimedia Interface) is a digital interface for audio and video.
HDMI works without data compression so that there is no quality loss from the
system.
Automatic
HDMI Video Format
4:3
Select the screen resolution of your connected television set.
HDMI/Optical
Automatic: The system automatically chooses the setting to match the connected
On
unit. This setting normally does not need to be changed. If you are not satisfied with
the picture quality, it may help to change this setting.
Only the settings supported by the connected unit can be selected.
RETURN
Aspect for 4:3 Video
Select the aspect for playback of a 4:3 video on the connected 16:9 television.
(Only possible if a HDMI resolution of [720p] or [1080i] has been selected.)
Output depends on the television set.
4:3: Picture is output as original aspect.
16:9: Picture output as 16:9 aspect with side panels.
DigitaI Audio Output
HDMI and Optical: Both outputs are activated with an audio signal.
Optical Only: Only the OPTICAL connection is activated with a signal.
VIERA Link
On: When set to [On], the DVD Recorder can work with connected units.
Off: When HDAVI Control is not being used.
Setup
Settings
OK
[576i/480i, 576p/480p, 720p, 1080i] [Automatic]
Options
[16:9] [Pan & Scan] [Letterbox]
[On] [Off]
[PAL] [NTSC]
81
[4:3] [16:9]
[HDMI and Optical] [Optical Only]
[On] [Off]
OK