Connection To The Front Input Dv In Or Av3; Connections - Panasonic Diga DMR-EX80S Operating Instructions Manual

Connections

Television
HDMI
IN
HDMI
HDMI
IN
OUT
DVD Recorder
COMMON
INTERFACE
VIDEO S VIDEO
DVD Recorder
DMR-EX80S
S VIDEO IN VIDEO IN L/MONO-AUDIO IN-R
DV IN AV3
DV cable
With S VIDEO and Audio cable
DMR-EX80S
S VIDEO IN VIDEO IN L/MONO-AUDIO IN-R
DV IN
AV3
S VIDEO
cable
With Audio/Video cable
DMR-EX80S
S VIDEO IN VIDEO IN L/MONO-AUDIO IN-R
DV IN AV3
Audio/Video cable
Connecting external units
Before connection, turn off all equipment and read the appropriate operating
instructions.
Amplifier or external unit with HDMI cable
Connect the amplifier or external unit according to the drawing.
Switch the units on.
On the television, select the input channel for the DVD Recorder.
If an externally connected unit only supports dual-channel audio, then an audio signal
Amplifier
with 3 or more channels is down-converted, with output through 2 audio channels.
It is not always possible to down-convert all discs.
Titles which cannot be down-converted can only be played back via HDMI at an
amplifier complying with the HDMI standard Ver. 1.1 (or higher).
For HDCP compatible units with DVI connection (e.g. PC monitor)
Depending on the unit, it is possible that the picture is not perfectly reproduced with
a DVI/HDMI adapter. The audio signal is not transmitted in this case.
Connection to the front input DV IN
EXT LINK CH Connect a DV compatible Camcorder to the front input DV IN.
Connect the DV output of the Camcorder with the DV input of the DVD Recorder,
using a DV cable.
After connecting the cables, switch both units on.
Press INPUT SELECT several times to select the DV input for the external unit.
The DV input of this unit is only intended for DV units. For example, a computer
cannot be connected up here. Some DV units do not permit perfect input of the
video and audio signal.
The DVD Recorder cannot be controlled via an external unit connected to the
DV IN input socket.
Automatic recording from DV IN
Connection to the front input AV3
If your external unit does not have a DV output, connect it via the front input AV3.
EXT LINK CH
If the audio output of the external unit is mono, connect it to the
Both the left and the right channel are recorded.
Audio cable
Select one of the two connection possibilities for AV3.
L-White
R-Red
The connection with S VIDEO and Audio cable (L/R) produces the best quality.
Press INPUT SELECT several times to select the AV3 input for the external unit.
Manual recording from Camcorder or Camera
EXT LINK CH
Video-Yellow
L-White
R-Red
57
29
L/MONO socket.
17