Connection To Component Video Terminal - Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

Connection to COMPONENT VIDEO terminal

Use one of the included RF coaxial cable (black or grey) to connect this unit's RF IN terminal to your aerial socket or aerial cable.
To the aerial
This unit's rear panel
AC IN
To household mains socket
(AC 220 V to 240 V, 50 Hz)
4
AC mains lead (included)
Connect only after all other
connections are complete.
To household mains socket
4
16
The terminal can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than S VIDEO OUT terminal.
The Q Link functions are not available with this kind of connection.
1
Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
2
Connect RF OUT (Aerial output) of the DVD Recorder with the
aerial input of the TV.
3
Connect the COMPONENT VIDEO OUT terminal of the unit with the
COMPONENT VIDEO IN of the TV unit. Use a video cable.
Always connect terminals with the same colour.
Connect the audio cables to the corresponding audio input terminals on the TV.
4
Connect the DVD Recorder and the television to the power supply system.
After completing the above connections, proceed to the Auto-Setup.
RF coaxial cable (included, grey)
RF coaxial cable (included, black)
AV OUT
L
OPTICAL
VIDEO OUT
R
AUDIO OUT
3
Audio cable
L - White
R - Red
AUDIO IN
Television's rear panel
1
or
1
COMPONENT VIDEO OUT
S VIDEO OUT
AV 2 (EXT) AV 1 (TV)
3
Video cable
Y - Green
PB - Blue
PR - Red
COMPONENT VIDEO IN
To this unit
RF IN
Y
P
B
P
R
RF OUT
2 RF coaxial cable
(included, black)
The RF cable cannot be
used for showing
pictures from the DVD
Recorder. The unit must
be connected by
another means e.g.
Scart cable to show
pictures from the DVD
Recorder on the
RF IN
television set.
11