Timer Recording; Programming Of Timer Recordings - Panasonic Diga DMR-EX80S Operating Instructions Manual

FUNCTION MENU
Remain HDD 36:40 SP
Timer
Recording
Name Date Start Stop DVD Mode
--.--.--- --:-- --:--
-----
All Services :
Please set Channel.
Change
OK
Profile
RETURN
Timer
Remain HDD 36:40 SP
Recording
Name Date Start Stop
5 VOX 5. 3. MON 14:00 15:00
All Services : VOX
Press OK to input a programme name.
OK
DELETE
RETURN
44
To Others

Programming of Timer Recordings

DVD: Insert a disc.
RAM
If you activated write protection, cancel it.
HDD: If you want to record a title to hard disk and copy it in High Speed mode at a
later date, select [Rec for High Speed Copy - On] in the Setup menu before the
recording.
Please read the information on High Speed Copy.
Press FUNCTION MENU.
Select [To Others] with
Confirm [Timer Recording] with OK.
Confirm [New Timer Programme] with OK.
Change to the next entry with
DVD 1:30 SP
Name
9:40:23 5. 3. MON
Blue
VPS
HDD
Date
---
SP
Start/Stop Start time/end of recording. If you press and hold the
Programme Name
Number
0 9
HDD/DVD
DVD 1:30 SP
Mode
9:40:23 5. 3. MON
VPS
HDD
RENEW
DVD Mode
DVD SP
Programme Name
To enter the title of the recording, select [Programme Name] with
with OK.
Enter the required name
Press STOP
After making your changes, save your programming with OK.
To enter other programmes, select [New Timer Programme].
The unit automatically switches to Timer mode at the start time.
One minute before recording starts, REC flashes on the unit display.
A Timer Recording does not start while a disc is being formatted, deleted or finalized.
The recording begins afterwards.
If you have programmed the timer programmes one after the other in sequential
order, as from the second timer recording:
HDD RAM
-R +R
This unit records with a data compression system (VBR - Variable bit rate). The
length of the programmed recordings is adjusted variably to the video data being
recorded. It is therefore possible that there will be differences between the displayed
and the actual recording time.

Timer Recording

61
and confirm with OK.
Select the station.
Use the Blue Button to switch between the stored profiles.
One-time, daily or weekly programming.
the time increases/decreases in 30-minute intervals. You can also
use the number buttons for these entries.
Select the drive.
Recording mode: XP, LP, EP, SP, FR
For HDD when the date is set to e.g. [SUN - SAT] or [MON - FRI].
[ON]: The new recording overwrites the old one.
[OFF]: The recordings are made continuously.
31.
to adopt the name.
The first few seconds are not recorded,
-RW +RW
approx. 30 seconds are not recorded.
68
48
and change the setting with
HDD
DVD
.
buttons,
and confirm