Component Video Out Terminal; Progressive Tv - Panasonic DMR-EX75 Operating Instructions Manual

COMPONENT VIDEO OUT
TV
COMPONENT
VIDEO IN
Audio input L/R
Y P P
B R
Video cable
Y - Green
P - Blue
B
P - Red
R
Setup TV Aspect
Progressive
TV System
Tuning
HDMI Settings
Disc
Picture
AV1 Output
Sound
AV2 Settings
Display
Active Antenna
Connection
SELECT
Others
ENTER

COMPONENT VIDEO OUT terminal

The terminal can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT terminal. Connections via these terminals output
the colour difference signals (P
Colours can be reproduced true to the original colour.
Connect the COMPONENT VIDEO OUT terminal of the unit with the
Audio cable
L - White COMPONENT VIDEO IN of the TV unit. Use a video cable.
R - Red
Always connect terminals with the same colour.
Connect the audio cables to the corresponding audio input terminals on the TV.
Connecting a TV with COMPONENT VIDEO input terminal
If your TV with LCD or plasma screen supports the progressive process, connect it
16:9
to the COMPONENT VIDEO OUT terminals.
On
If you want to enjoy full progressive video, set Progressive to [On].
PAL
Press FUNCTIONS.
Video
Select [To Others] with
Select [Setup] with
Off
Select [Connection] with
TAB
Select the option [On] with
RETURN
If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
there is no output to the COMPONENT VIDEO OUT terminals.
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminals,
output is Interlace regardless of the settings
Progressive television picture
The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with a
picture aspect ratio of 16:9 is properly displayed. However, video material with an
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
With a normal television, the progressive output can cause the picture to flicker, even
if the television is progressive compatible.
Select the setting [Progressive - Off].
Notes on progressive-capable televisions (PAL)
LCD/plasma televisions or LCD projectors
If progressive output is used, high resolution, e.g.
DVD-Videos, can be viewed. COMPONENT VIDEO
OUT of this unit is connected with the COMPONENT
VIDEO IN of the television. Select the setting
[Progressive - On].
COMPONENT
VIDEO OUT
DVD-Recorder
/P ) and the brightness signal (Y) separately.
B R
and confirm with ENTER.
and confirm with ENTER.
, [Progressive] with ,
and confirm with ENTER.
Progressive output
COMPONENT
VIDEO IN
and confirm with ENTER.
.
Conventional televisions
In normal television sets, the progressive output
process can lead to flickering, even if the
television is progressive-capable. Select the
setting [Progressive - Off].
COMPONENT
VIDEO OUT
Progressive output
COMPONENT
DVD-Recorder
65
65
VIDEO IN
19