Add Transponder / Service; Delete Transponder - Panasonic Diga DMR-EX80S Operating Instructions Manual

FUNCTION MENU
Advanced Setup
Setup
Satellite Configuration

Add Transponder / Service

Delete Transponder

Tuning
Disc
Picture
Sound
Display
Add Transponder/
Anschluss
Transponder Frequency
Service
Sonstige
Polarisation
Symbol Rate
Astra 19.2° E
FEC
Hot Bird 13° E
LNB C
Service Data
LNB D
Add Transponder
Add Transponder/
Transponder Frequency
Service
Polarisation
Symbol Rate
Astra 19.2° E
FEC
Hot Bird 13° E Searching ...
LNB C
Service Data
LNB D
Add Transponder
Add Transponder/
Transponder Frequency
Service
Polarisation
Symbol Rate
Astra 19.2° E
FEC
Hot Bird 13° E
LNB C
Service Data
LNB D
Add Transponder
Service Data
Add Transponder/
Service
Video PID
Audio PID
Astra 19.2° E
PCR PID
Hot Bird 13° E
Searching ...
AC3 PID
LNB C
Add Service
LNB D
10832 MHz
Delete
Transponder 10921 MHz
10979 MHz
111509 MHz
Astra 19.2° E
Are you sure?
10910 MHz
Hot Bird 13° E
Yes
LNB C
11685 MHz
LNB D
11720 MHz
11759 MHz
60
To Others
Tuning
There are several transponders on one satellite. Each transponder can transmit
several TV and radio programmes and data in parallel.
You can obtain the satellite, transponder and programme data from each particular
station provider or on the internet.
Add Transponder
Select the satellite with
0 MHz
Select [Transponder Frequency] with
Horizontal
Use the number buttons to enter the required value and confirm with OK.
22000 ksym/s
Select the next settings with
Auto
Enter the values for [Polarisation], [Symbol Rate] and [FEC] and confirm with OK.
Transponder Frequency
Polarisation
Polarisation indicates whether the transponder transmits the satellite signal
horizontally or vertically.
Symbol Rate
Data flow transmission rate from the satellite to the dish.
11768 MHz FEC (forward error correction)
Horizontal The transmitted signal contains redundant data which allows the receiver to detect
and correct errors. With the [Auto] setting, the unit selects error correction.
27500 ksym/s
Auto
Select [Add Transponder] with
transponder and all its stations begins.
The found transponder is stored.
Press OK for the message to disappear.
Service Data
0 MHz
If you want to add just one single station of a transponder, first enter the transponder
Horizontal
data as described above.
22000 ksym/s
Select [Service Data] with
Auto
Select [Video PID] with
Enter the required value with the number buttons and confirm with OK.
Select the next settings with
Enter the required values for [Audio PID], [PCR PID] and [AC3 PID] and confirm
with OK.
Video PID : Package ID No. for video data.
Audio PID: Package ID No. for audio data, e.g. audio for various languages.
1279
PCR PID : Package ID No. for programme clock reference.
- - - -
AC3 PID : Package ID No. for Dolby Surround.
1279
The data flow from the satellite consists of many data packages. Each data
- - - -
package has an identification number describing the contents of the package.
Select [Add Service] with
station begins.
Tuning
Select the satellite with
Select the transponder frequency with ,
Select [Yes] with
No
Together with the transponder, the EPG data are also deleted.
Setup
Advanced Setup
OK
.
and confirm with OK.
and confirm with OK.
[22000, 27500, 28000, 30000 ksym/s] [----- ksym/s (User Def.)]
and confirm with OK. The search for the entered
and confirm with OK.
and confirm with OK.
and confirm with OK.
and confirm with OK. The search for the required
Advanced Setup
.
and confirm with OK. The transponder is deleted.
Add Transponder / Service
[Horizontal] [Vertical]
[Auto] [1/2, 2/3, 3/4, 5/6, 7/8]
Delete Transponder
OK
and confirm with OK.
OK
[0 MHz]
OK