Component-Video Out - Panasonic DMR-EH80V Operating Instructions Manual

COMPONENT VIDEO OUT
(HDD/DVD only)
TV
A B
Audio
input
L/R
E
Audio cable
A
Red/R
B
White/L
AUDIO OUT L/R
E
= Extra equipment for the connections shown
If the AV1 Output setting in the SETUP menu is set to
[RGB (without component)], no output will take place
to the COMPONENT VIDEO OUT sockets.
Set this option to [Video (with component)].
If the unit is connected to the television via the VIDEO OUT,
the S VIDEO OUT or the AV1 socket, output takes place in
the interlace format regardless of the settings.
26
COMPONENT VIDEO OUT socket
These sockets can be used for interlace or progressive output and deliver a
clearer picture than the S VIDEO OUT socket. Connections via these sockets
COMPONENT
output colour difference signals ( / ) and luminance signal ( ) separately.
VIDEO IN
Colours can be reproduced true to colour. The properties of the COMPONENT
Y P P
R
B
VIDEO input socket are dependent on the television set or screen.
Always connect sockets of the same colour. Connect the Audio cable to the
A B C
corresponding audio input sockets of the television.
E
Video cable
A Connecting a television with COMPONENT VIDEO input sockets
Green/Y
B
Blue/P
B
If your television with LCD or plasma screen supports the progressive
C
Red/P
R
procedure, connect it to the COMPONENT VIDEO OUT sockets.
If you want to enjoy progressive-quality video, set Progressive to [On].
HDD/DVD OUT
Progressive television picture
The progressive aspect ratio (height to width) is set to 16:9.
DVD-Video with an aspect ratio of 16:9 will be displayed properly. However,
video material with an aspect ratio of 4:3 will be displayed stretched to the right
and left.
If it is possible to adjust the aspect ratio of your television for progressive
images, set the Progressive setting to on.
In normal televisions, progressive output can lead to flickering, even if the
television is progressive-compatible.
Make sure that the Progressive setting is set to [Off].
Press FUNCTIONS in stop mode.
Use to select [To Others] and confirm with ENTER.
Use to select SETUP and confirm with ENTER.
Use to select [Connection], ,
with ENTER.
Use to the select the [On] option and confirm with ENTER.
P
P
B R
to select [Progressive] and confirm
Y
106