Connection To Component Video Socket - Panasonic Diga DMR-EZ25EB Operating Instructions Manual

Connection with HDMI cable (not included)
Connection to COMPONENT VIDEO terminal
Use one of the included RF coaxial cable (black or grey) to connect this unit's RF IN terminal to your aerial socket or aerial cable.
RF coaxial cable (included, black)
The RF cable cannot be used for
showing pictures from the DVD
Recorder. The unit must be connected
by another means e.g. Scart cable to
show pictures from the DVD Recorder
on the television set.
54
The terminals can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT terminal.
The Q Link functions are not available with this kind of connection.
1
Connect the aerial to RF IN (Aerial input) of the DVD Recorder.
2
Connect RF OUT (Aerial output) of the DVD Recorder with the
aerial input of the TV.
3
Connect the COMPONENT VIDEO OUT terminals of the unit with the
COMPONENT VIDEO IN of the TV unit. Use a video cable.
Always connect terminals with the same colour.
Connect the audio cables to the corresponding audio input terminals on the TV.
4
Connect the DVD Recorder and the television to the household mains socket.
After completing the above connections, proceed to the Auto-Setup to tune in
TV channels.
To the aerial
2
3
Video cable
PB - Blue
PR - Red
RF IN COMPONENT VIDEO IN
Television's rear panel
RF coaxial cable (included, grey)
RF coaxial cable (included, black)
3
Audio cable
Y - Green
L
R
AUDIO IN
1
or
1
This unit's rear panel
AC mains lead (included)
Connect only after all other
connections are complete.
- White
- Red
To household mains socket
(AC 220 V to 240 V, 50 Hz)
4
9
To this unit
4