System Update - Panasonic Diga DMR-EX80S Operating Instructions Manual

FUNCTION MENU

System Update

Setup
EPG Download in Standby
Software Update in Standby
EPG / Software search period
Tuning
Sofware Update Search Now
Disc
EPG Update Search Now
Picture
Sound
Display
SELECT
Connection
OK
RETURN
Others
EPG Update
Download EPG data.
Please wait !
0%
To Others
Others
On
System Update
On
Automatic
EPG Download in Standby
On: If the DVD Recorder is in Standby mode, the EPG programme data are
updated from the satellite Astra 19.2° E during the adjusted time period and then
stored.
Off: Automatic update does not take place.
Software Update in Standby
On: If the DVD Recorder is in Standby mode, it automatically searches for updated
software during the adjusted time period. The unit display shows the software
update. If the unit is in recording standby, this does not affect Timer-controlled
recordings.
Off: Automatic update does not take place.
Depending on the contents of the update, some of the settings can be reset to the
factory defaults. In this case, readjust the settings.
EPG / Software search period
Automatic: The unit searches for current EPG programme data and new software
once every 24 hours.
[02:00- 06:00; 06:00- 10:00; 10:00- 14:00; 14:00- 18:00; 18:00- 22:00; 22:00- 02:00]
The search for current EPG programme data and new software starts within the
adjusted time period.
Make sure that your unit is in Standby mode during this time.
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not switch your unit off
during the update. A message shows that the update has finished.
EPG Update Search Now
100%
Start the search for new EPG programme data manually. Do not switch your unit
off during the update. A message shows that the update has finished.
Initialize
Shipping Condition
All settings, except for the security levels with corresponding password and the time
settings, are reset to the factory default settings.
Default Settings
All settings, except for the programmed channels, time, country, language and disc
language settings, the security levels with corresponding password and the remote
control code, are reset to the factory default settings.
Setup
Settings
OK
[Shipping Condition] [Default Settings]
Options
[On] [Off]
[On] [Off]
[Automatic]
OK
67