Component Video Out - Panasonic DMR-EX75 Operating Instructions Manual

COMPONENT VIDEO OUT

TV
COMPONENT
VIDEO IN
Audio input L/R
Y P P
B R
Video cable
Y - Green
P - Blue
B
P - Red
R
Setup
TV Aspect
Progressive
TV System
Tuning
HDMI Settings
Disc
Picture
AV1 Output
Sound
AV2 Settings
Display
Active Antenna
Connection
SELECT
Others
ENTER
COMPONENT VIDEO OUT terminal
The terminal can be used for Interlace or Progressive output and deliver a clearer
picture than the S VIDEO OUT terminal. Connections via these terminals output
the colour difference signals (P
Colours can be reproduced true to the original colour.
The properties of the COMPONENT VIDEO input terminal are dependent on the
TV or screen.
Connect the COMPONENT VIDEO OUT terminal of the unit with the
Audio cable
L - White COMPONENT VIDEO IN of the TV unit. Use a Video cable.
R - Red
Always connect terminals with the same colour.
Connect the Audio cables to the corresponding audio input terminals on the TV.
Connecting a TV with COMPONENT VIDEO input terminal
If your TV with LCD or plasma screen supports the progressive process, connect it
16:9
to the COMPONENT VIDEO OUT terminals.
On
If you want to enjoy full progressive video, set Progressive to [On].
PAL
Press FUNCTIONS.
Video
Select [To Others] with
Select [Setup] with
Off
Select [Connection] with
TAB
Select the option [On] with
RETURN
Press RETURN several times, in order to return to the television picture.
If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
there is no output to the COMPONENT VIDEO OUT terminals.
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 terminals,
output is Interlace regardless of the settings
Progressive television picture
The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with
a picture aspect ratio of 16:9 is properly displayed. However, video material with an
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio on your television, select the setting [Progressive - On].
With a normal television, the progressive output can cause the picture to flicker,
even if the television is progressive-compatible.
Select the setting [Progressive - Off].
Progressive-compatible televisions (PAL)
LCD/plasma television or LCD projector
If progressive output is used, videos can be viewed
in High Resolution, for example from DVD-Video.
COMPONENT VIDEO OUT on this unit is connected
with the COMPONENT VIDEO IN on the television.
Select the [Progressive - On] setting.
COMPONENT
VIDEO OUT
COMPONENT VIDEO OUT
DVD-Recorder
/P ) and the brightness signal (Y) separately.
B R
and confirm with ENTER.
and confirm with ENTER.
, [Progressive] with ,
and confirm with ENTER.
Y
P
B
P
R
Progressive output
COMPONENT
VIDEO IN
and confirm with ENTER.
.
Conventional televisions
On a normal television, Progressive output can
cause flickering even if the television is
Progressive-compatible.
Select the [Progressive - Out] setting.
COMPONENT
VIDEO OUT
Y
COMPONENT VIDEO OUT
P
B
P
R
COMPONENT
VIDEO OUT
Progressive output
DVD-Recorder
65
65
COMPONENT
VIDEO IN
19