Satellite Configuration - Panasonic Diga DMR-EX80S Operating Instructions Manual

FUNCTION MENU
Advanced Setup
Setup

Satellite Configuration

Add Transponder / Service
Delete Transponder
Tuning
Disc
Picture
Audio
Satellite
Display
DiSEqC
Configuration
SELECT
Anschluss
Number of LNBs
Sonstige
OK
Switching Voltage
DiSEqC/LNBs
LNB A
LNB B
LNB C
LNB D
Satellite
DiSEqC
Configuration
Number of LNBs
Switching Voltage
DiSEqC/LNBs
LNB A
LNB B
LNB C
LNB D
Satellite: No
Satellite
Configuration
Add Satellite
Delete Satellite
DiSEqC/LNBs
LNB Freq. Low Universal
LNB A
LNB Freq. High Universal
LNB B
LNB C
Start scan?
LNB D
Yes No
Store this satellite?
Yes No
Satellite: Astra 19.2° E
Satellite
Configuration
Add Satellite
Delete Satellite
DiSEqC/LNBs
LNB Freq. Low Universal
LNB A
LNB Freq. High Universal
LNB B
Do you really want to
LNB C
delete this satellite?
LNB D
Yes No
To Others
Tuning
In Advanced Setup, you can set up additional satellites and make adjustments
to your satellite system.
To receive several satellites with one dish, e.g. Astra 19.2° E and Hot Bird 13° E, you
need a Multifeed dish combined with a DiSEqC switch between the receiver of your dish
(LNB) and the DVD Recorder.
Your dish must be equipped with two offset universal LNBs.
Auto
DiSEqC/LNB
1
13 / 18V Select [DiSEqC] with
Select the required setting with
Select [Number of LNBs] with
Select the required quantity with
Select [Switching Voltage] with
DiSEqC
Auto
Auto: Automatic search for LNB and DiSEqC switch.
2
Mini DiSEqC: 1 to 2 LNBs
13 / 18V
DiSEqC: 1 to 4 LNBs
No: Single LNB
Number of LNBs
One LNB is default (LNB A).
You need one LNB for each satellite you want to receive.
Switching Voltage
Voltage for horizontal and vertical polarisation switching.
13 / 18 V: Standard setting
14 / 19 V: The voltage can be increased to 14 / 19 V for long cable distances.
Add Satellite
Select [Add Satellite] with
To start searching for the satellite receivable with this LNB, confirm [Yes] with OK.
If you are not using a universal LNB, enter the corresponding LNB frequencies for
[LNB Freq. Low] and [LNB Freq. High].
LNB Freq. Low
LNB Freq. High
The LNB converts the signals from the satellite into a corresponding frequency
range for the DVBS receiver. The standard setting for LNB Freq. Low is
[9750 MHz (Universal)], for LNB Freq. High: [10600 MHz (Universal)].
To store this satellite, confirm [Yes] with OK.
The search for TV and radio stations begins.
Delete Satellite
Select the required LNB with
Select [Delete Satellite] with
To delete the satellite, confirm [Yes] with OK.
The satellite is deleted. Deleting the satellite and corresponding stations can take
some time.
Together with the satellite, the EPG data are also deleted.
Setup
Advanced Setup
OK
and confirm with OK.
and confirm with OK.
and confirm with OK.
and confirm with OK.
and confirm with OK.
[Auto] [Mini DiSEqC] [DiSEqC] [No]
, and confirm with OK.
[9750 MHz (Universal), 10000 MHz, 10250 MHz]
[10600 MHz, 10750 MHz, ----- MHz (User Def.)]
[9750 MHz, 10000 MHz, 10250 MHz,]
[10600 MHz (Universal), 10750 MHz, ----- MHz (User Def.)]
.
and confirm with OK.
Satellite Configuration
OK
[1] [2] [3] [4]
[13 / 18 V] [14 / 19 V]
59