Minolta EP4000 Operator's Manual page 117

Insert the new Staple Cartridge in the
5
direction of the arrow until it clicks
into position.
Close the Stapler Door and slide the
6
Staple Sorter back against the copier.
Place a sheet of paper into the 1st Bin
7
of the Staple Sorter.
Touch .
Staple
8
The Staple Sorter automatically
*
test-staples the paper 2 to 3 times.
3. When the Message "The Staple Cartridge is empty." Appears
9
1149O1440A
1139O1320A
1149O320CB
Remove the sheet of paper from the 1st
Bin and check that staples have been
driven into it.
* If no staples are evident, place
another sheet of paper into the 1st
Bin and repeat steps 7, 8, and 9.
NOTES
Replace the Staple Cartridge only after
you are prompted to do that by the
message. Removing the Staple
Cartridge before then will result in
stapling trouble.
Immediately after the new Staple
Cartridge has been loaded, be sure to
follow steps 7 to 9.
DO NOT turn the green gear near the
cartridge inside the Stapler Unit.
111
1151O111AA