Inside The Copier - Minolta EP4000 Operator's Manual

Inside the Copier

3
2
1
10
9
Toner Bottle Holder
1
Toner Bottle
2
Original Width Scale
3
Original Length Scale
4
Original Pad
5
Original Glass
6
Corona Unit Cleaning
7
Lever
Dehumidifier Switch
8
Transport Section
9
Release Lever M2
10 Misfeed Removal
Knobs M1 , M3
4
8
10
: Swing open to replace the Toner Bottle.
: Contains toner. Replace it with a new one when the warning
message tells you to.
: Place the original along this Scale for correct positioning.
: Place the original along this Scale for correct positioning.
: Holds the original in position on the Original Glass.
: Place the original face down on this Glass.
: Operate the Lever to clean the Corona Unit if unwanted lines are
produced on the copy.
: Do not touch this switch, it's for the exclusive use by the
Technical Representative.
: Swing down to release the Transport Section for clearing a misfed
sheet of paper.
: Use to clear a misfed sheet of paper.
3. Copier Parts and Accessories
5
6
p. 108
p. 141
p. 115
11
7
1134O009AA