Note the correct direction of the originals if the copies are to be punched using Hole Punch.
NOTE
Hole Punch is possible only when your copier is equipped with a 20-Bin Staple Sorter.
Using the Automatic/Duplexing Document Feeder
Load the originals so that the punched holes in them are located as shown below.
Correct:
Punched Hole Position
Placing the Original on the Glass
Load the originals so that the punched holes in them are located as shown below.
Correct:
Original
Originals
Punched Hole Position
6. Finishing Mode
Copies
1149O089DA
Copy
1149O092EA
55