Minolta EP4000 Operator's Manual page 115

Tap a new Toner Bottle against a desk
3
or other hard surface four to five times.
Then, turn the Toner Bottle upside
down and tap it in the same way again.
Shake the new Toner Bottle well.
4
With the Seal facing upward, insert the
5
Bottle into position.
2. When the Message "Replenish Toner." Appears
6
1134O075AA
7
1138O048AA
1136O005AA
Check that the marking on the
Bottle is aligned with the
on the Toner Bottle Holder.
Then pull the seal off the Toner Bottle.
Swing the Toner Bottle Holder closed
and close the Front Door.
NOTES
Use ONLY the specified toner for this
copier. Using any other toner could
result in image trouble.
Do not turn OFF the Power Switch or
open the Door while the copier is
replenishing toner.
Toner Replenisher
Use the Toner Replenisher function
available from the User Mode if the
image is light immediately after the
Toner Bottle has been replaced with a
new one. p. 83
109
marking
1136O006AA
1136O007AA