Minolta EP4000 Operator's Manual page 94

88
4. User's Choice
6/6
Orig. Copy Default
Select the type of Orig.
selected automatically when the copier is
turned ON or panel reset.
The initial setting is 1
When the copier is equipped with a Duplex
Unit, the initial setting is 1
your Technical Representative if you want
to set 1 1 for Orig.
Auto Power-OFF Mode
Select the time it takes the Auto Power-OFF
function to be activated, from 1 min. to 120
min. in 1-min. increments. Auto Power-
OFF shuts down the copier a given period of
time after the last operation.
Initial Setting
EP4000
EP5000
Consult your Technical Representative if
you want to disable this function.
Original on Glass
Select whether to turn "ON" or "OFF" the
beep that sounds when you attempt to load
an original in the document feeder with
another one left on the glass.
The initial setting is "Beep ON."
Copy setting
1.
2. Consult
Copy Default.
60min
90min
Administrator Mode
This mode is used only by the administrator
of your copier. When Administrator Mode
is selected, the copier prompts you to enter
your "Admin. #" (administrator number).
The following functions can be set only
when the correct administrator number is
entered. The administrator number is set by
the Technical Representative. For more
details, consult your Technical
Representative.
See p. 92 for setting the Copy Track
function.
CopyTrack
This function allows the administrator to
keep track of the number of copies made by
each account.
Select either "OFF," "100 Accounts," or
"1000 Accounts."
The initial setting is "OFF."
When "100 Accounts" is selected:
ID #:
You can program or change your
access number (for a max. of 100
accounts).
Limit:
You can limit the maximum number of
copies that can be made.
Total:
Displays the count of the Total
Counter. You can also clear the
counter.
Size:
Displays the count of the Size Counter.
When "1000 Accounts" is selected:
Total:
Displays the count of the Total
Counter. You can also clear the
counter.