Minolta EP4000 Operator's Manual page 118

112
3. When the Message "The Staple Cartridge is empty." Appears
20-Bin Staple Sorter
Taking hold of the Lock Release Lever
1
of the Staple Sorter, slide the Staple
Sorter away from the copier.
Open the Stapler Door.
2
While pressing the Staple Cartridge
3
Release Lever down in the direction of
the arrow, pull the Staple Cartridge out
of its port.
Pull the staple belt about 3 cm (1 inch)
4
out of the new Staple Cartridge and
break off that portion.
1136O166AA 1136O166AA
1136O011AA
1139O0970A
1134O076AA
NOTE
Check that no portion of the staple belt
hangs out of the cartridge. Break off
any portion of the belt that hangs out of
the cartridge.
Insert the new Staple Cartridge in the
5
direction of the arrow until it clicks
into position.
Close the Stapler Door and slide the
6
Staple Sorter back against the copier.
Place a sheet of paper into the 1st Bin
7
of the Staple Sorter.
Non-Sort Bin
1st Bin
1136O013AA
1149O400AA
1149O401AA