Minolta EP4000 Operator's Manual page 133

Message
Original(s) left on the Glass.
2-sided copying is not possible on
paper sizes less than A5 size.
Sorting or Grouping is not possible
with A5 , B6 or 5-1/2
8-1/2 paper sizes.
Stapling is not possible on paper
sizes less than B5 size.
Hole-Punching is only possible
with A3 and A4 sizes.
Matching paper size isn't available.
Reselect paper size or change
zoom.
Matching paper size isn't available.
Please change direction of original.
Auto Sizing is not possible. Select
another zoom method or paper size.
Please load Cover paper into the
source indicated below.
Please load Insert sheets into the
indicated paper source.
To staple, please remove all the
remaining copies from the Sorter.
Remove copies from the Sorter.
Please load the originals into the
Document Feeder.
Copies remain in the Duplex Unit,
please press START to feed them
out.
Manual Feeding cannot be
combined with duplexing. Cancel
either one.
XXX and OOO cannot be
combined.
Cause
You have left an original on the
Original Glass.
You have selected a paper size that
is not good for 2-sided copying.
You have selected a copy paper
size not good for Sort or Group.
You have selected a copy paper
size not good for Sort Staple.
You have selected a copy paper
size not good for Hole Punch.
No drawers contain paper of the
right size to run a copy cycle in the
Auto Paper mode.
The copy paper of the calculated
size is loaded in a direction
different from that of the original
to run a copy cycle in the Auto
Paper mode.
The zoom ratio calculated based on
the original size and copy paper
size is outside the range from
to 2.0 to run a copy cycle in the
Auto Size mode.
Paper for covers has run out.
Paper for covers is not loaded.
The paper source specified for
inserts has run out of paper.
The paper source specified for
inserts is not loaded with paper.
A stapled copy set/stack is left in
the Sorter Bin.
A copy or copies are left in the
Sorter Bins.
The originals are not loaded in the
document feeder, though a mode
that requires the document feeder
(Cover, Page Insertion, etc.) has
been set.
A copy or copies are left in the
Duplex Unit.
Two-sided copying is not possible
with paper loaded in the Multi
Bypass Tray.
You have set two functions that
conflict with each other.
6. What Does Each Message Mean?
Action
Remove the original from the
Glass.
Select a standard copy paper size
of A5 or larger, or cancel 2-sided
copying.
Select a standard copy paper size
of A5 (5-1/2" 8-1/2"
larger, or cancel Sort or Group.
Select a standard copy paper size
of B5 or larger, or cancel Sort
Staple.
Select the specified paper size or
cancel Hole Punch.
Cancel Auto Paper and select the
appropriate copy paper size or
change the zoom ratio.
Change the direction of the
original.
Cancel Auto Size and select the
appropriate zoom ratio or change
0.5 the copy paper size.
Load paper for covers.
Load the specified paper source
with the paper for inserts.
Remove all copies from the Sorter
Bins or cancel Sort Staple.
Remove all copies from the Sorter
Bins.
Load the originals in the document
feeder.
Press the Start key to feed the
copies out of the Duplex Unit and
out onto the Exit Tray.
Select another paper source or
1-sided copying.
Cancel either one of the two
functions.
127
) or
p.102