Specifying The Settings For A Group Dial Key - Konica Minolta SU-502 User Manual

Getting ready

Specifying the settings for a group dial key

FTP server addresses cannot be registered as a group.
1
Press the [Utility] key.
2
Press the , key until
TRATION
3
Press the [3] key on the 10-key pad
to select
4
Press the one-touch dial key where
you wish to add a group dial setting.
5
Enter a group name, and then press
the [Yes] key.
– For information on entering text,
refer to "Entering text characters"
on page 2-15.
– Up to 20 characters can be entered for the group name.
6
Use the one-touch dial keys and
speed dial numbers to enter the ad-
dress for the recipient.
7
Select the next destination, and then
press the [Yes] key.
– Repeat steps 6 and 7 until all of
the destinations have been spec-
ified.
– Up to 50 destinations can be specified for one group dial key.
– In this case, the numbers of destinations specified for the one-
touch (group dial) key are added to the current group dial setting.
SU-502
FAX REGIS-
appears.
GROUP DIAL.
3
3-41