Table of Contents
Advertisement
Getting ready
Specifying the POP3 server address
1
Press the [Utility] key.
The Utility mode menu appears.
2
Press the + or , key until
SETTING 2
3
Press the [1] key on the 10-key pad
to select
4
Enter the IP address or host name of
the POP3 server.
–
For information on entering text,
refer to "Entering text characters"
on page 2-15.
–
Up to 64 characters can be entered for the host name.
–
The DNS settings must have been specified before the host name
for the POP3 server can be specified.
–
The illustration at the right is an example of a host name. Consult
your network administrator for details about this setting.
5
Press the [Yes] key.
The e-mail setting 2 screen appears.
SU-502
E-MAIL
appears.
POP3
SERVER.
3
[ ]
3-23
Advertisement
Table of Contents
