Table of Contents
Advertisement
3
SMTP & POP3 configuration
SMTP configuration
Function
SMTP server address
Default subject for e-mail
attachment
Sender name
E-mail address
Port number
SMTP server timeout
3-30
Description
This function is used to specify the IP address or host name of an
SMTP server. (Up to 64 characters)
This function is used to specify the default subject line when
sending scan data as an e-mail attachment. (Up to 20 characters)
This function is used to specify the sender's name when sending
scan data as an e-mail attachment. (Up to 20 characters)
This function is used to specify the e-mail address of the sender.
This function is used to specify the port number for the SMTP
server. Normally, port number 25 is used. (1 to 65535)
This function is used to specify the length of time (30 to 300 sec-
onds) until the connection to the SMTP server times out.
Getting ready
SU-502
Advertisement
Table of Contents
