Table of Contents
Advertisement
Getting ready
Specifying the subnet mask
1
From the network setting menu in the
utility mode, press the [2] key on the
10-key pad to select
MASK.
2
Using the 10-key pad, enter the sub-
net mask value.
–
The illustration at the right is an
example of a subnet mask ad-
dress. Consult your network administrator for details about these
settings.
3
Press the [Yes] key.
The network setting screen appears. To register settings in the ma-
chine, the machine must be turned off, then on again.
4
While the network setting screen is displayed, press the [No/C] key or
[Panel Reset] key so that the message
SUPPLY OFF/ON
5
Set the power switch of the machine to "o", then "n" to restart the ma-
chine.
SU-502
SUBNET
appears.
PLEASE RE-START POWER
3
3-13
Advertisement
Table of Contents
