Table of Contents
Advertisement
Using scan to server (FTP) operations
–
If there is no address registered for the specified speed dial
number, an error message appears. Enter a correct speed dial
number.
4
Press the [Yes] key.
–
To skip specifying the image res-
olution, press the [Start] key, in-
stead of the [Yes] key.
5
Press the * and ) keys to select the
color mode
press the [Yes] key.
–
COLOR
the scan mode when the automatic document feeder is used. In
that case, select
6
Press the * and ) keys to select the
resolution (150 × 150 dpi, 300 × 300
dpi, or 600 × 600 dpi), and then press
the [Yes] key.
–
The 600 × 600 dpi resolution cannot be selected if
lected as the scan mode in step 5.
–
To specify detailed settings for the scan mode, press the , key.
–
For information on specifying detailed settings, refer to "Changing
the scan mode settings" on page 4-10.
7
Press the * and ) keys to select
ADF.
–
To change the size of the
scanned image, press the , key.
–
For information on changing the size, refer to "Changing the
scanned image size" on page 4-12.
8
Press the [Start] key.
The machine scans the document, then connects to the FTP server and
uploads the data.
Note
Up to 10 specified recipients can be notified by e-mail of the FTP server
address where a file was uploaded. When using PageScope Web Con-
nection to register the speed dial information, select "Enable Notifica-
tion". (Refer to "Adding a new speed dial (FTP server) setting" on
page 3-53.)
SU-502
(GRAY
or B/W), and then
cannot be selected for
or
GRAY
(black and white).
B/W
5
was se-
GRAY
5-5
Advertisement
Table of Contents
