Configuring Remote Management - ZyXEL Communications P-2812HNU-51c User Manual

DSL Connections Status
Go to the Status screen. Check and write down the WAN IP addresses assigned
1
by your ISP for the WAN connections in PTM mode you configured (2 and 3 in this
example). Your DSL interface status should also be Up and display the
transmission rates.
Click the WAN Service Statistics link under More Status in the Status screen.
2
The WAN Service Ststistics screen displays. Check if any packets are
3
transmitted or received through the two WAN connections you just configured.

2.4.2 Configuring Remote Management

Follow the steps below to not allow access to the P-2812HNU-51c from the LAN.
P-2812HNU-51c User's Guide
Chapter 2 Tutorials
65