The Wps Button; Turn The Wireless Lan Off Or On; Activate Wps - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 1 Introducing the P-2812HNU-51c

1.7 The WPS Button

You can use the WPS button on the rear panel of the device to turn the wireless
LAN off or on. You can also use it to activate WPS in order to quickly set up a
wireless network with strong security.

1.7.1 Turn the Wireless LAN Off or On

Make sure the POWER LED is on (not blinking).
1
Press the WPS button for one second and release it. The WLAN/WPS LED should
2
change from on to off or vice versa.

1.7.2 Activate WPS

Make sure the POWER LED is on (not blinking).
1
Press the WPS button for more than five seconds and release it. Press the WPS
2
button on another WPS -enabled device within range of the P-2812HNU-51c. The
WLAN/WPS LED should flash while the P-2812HNU-51c sets up a WPS
connection with the wireless device.
Note: You must activate WPS in the P-2812HNU-51c and in another wireless device
within two minutes of each other. See
information.
28
Section 7.10.4 on page 151
P-2812HNU-51c User's Guide
for more