ZyXEL Communications P-2812HNU-51c User Manual page 244

Chapter 16 Quality of Service (QoS)
Click QoS > Class Setup to open the following screen.
Figure 113 QoS Class Setup
The following table describes the labels in this screen.
Table 82 QoS Class Setup
LABEL
Add
Order
Active
Class Name
Classification
Criteria
Forward To
DSCP Mark
802.1P Mark
VLAN ID Tag
To Queue
Modify
Apply
244
DESCRIPTION
Click this button to create a new classifier.
This field displays the index number of the classifier.
Select the check box to enable the classifier.
This is the name of the classifier.
This shows criteria specified in this classifier, for example the interface
from which traffic of this class should come and the source MAC
address of traffic that matches this classifier.
This is the interface through which traffic that matches this classifier is
forwarded out.
This is the DSCP number added to traffic of this classifier.
This is the IEEE 802.1p priority level assigned to traffic of this
classifier.
This is the VLAN ID number assigned to traffic of this classifier.
This is the name of the queue in which traffic of this classifier is put.
Click the Edit icon to go to the screen where you can edit the
classifier.
Click the Remove icon to delete an existing classifier. Note that
subsequent rules move up by one when you take this action.
Click Apply to save your changes back to the P-2812HNU-51c.
P-2812HNU-51c User's Guide