Remote Management And Nat; System Timeout; Telnet; Ftp - ZyXEL Communications P-660R-Tx v2 Series User Manual

P-660R-Tx v2 Series User's Guide

10.1.2 Remote Management and NAT

When NAT is enabled:
• Use the ZyXEL Device's WAN IP address when configuring from the WAN.
• Use the ZyXEL Device's LAN IP address when configuring from the LAN.

10.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling.

10.2 Telnet

You can configure your ZyXEL Device for remote Telnet access as shown next.
Figure 32 Telnet Configuration on a TCP/IP Network

10.3 FTP

You can upload and download ZyXEL Device firmware and configuration files using FTP. To
use this feature, your computer must have an FTP client.

10.4 Web

You can use the ZyXEL Device's embedded web configurator for configuration and file
management. See the online help for details.

10.5 Configuring Remote Management

Click Remote Management to open the following screen.
88 Chapter 10 Remote Management Configuration