The Dynamic Dns Screen - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 17 Dynamic DNS Setup

17.3 The Dynamic DNS Screen

To change your P-2812HNU-51c's DDNS, click Advanced > Dynamic DNS. The
screen appears as shown.
Figure 116 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 86 Advanced > Dynamic DNS
LABEL
Service
Provider
Host Name
Interface
User Name
Password
Email
Key
Apply
Cancel
254
DESCRIPTION
Select the name of your Dynamic DNS service provider.
Type the domain name assigned to your P-2812HNU-51c by your
Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma
(",").
Select the WAN interface to use for updating the IP address of the
domain name.
Type your user name.
Type the password assigned to you.
If you select TZO in the Service Provider field, enter the user name
you used to register for this service.
If you select TZO in the Service Provider field, enter the password you
used to register for this service.
Click Apply to save your changes back to the P-2812HNU-51c.
Click Cancel to begin configuring this screen afresh.
P-2812HNU-51c User's Guide