ZyXEL Communications P-2812HNU-51c User Manual page 142

Chapter 7 Wireless LAN
Click Network > Wireless LAN >WPS. The following screen displays.
Figure 60 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 36 Network > Wireless LAN > WPS
LABEL
WPS Setup
Enable WPS
PIN Number
Generate
WPS Status
Release_Co
nfiguration
Apply
142
DESCRIPTION
Select the check box to activate WPS on the P-2812HNU-51c.
This shows the PIN (Personal Identification Number) of the P-2812HNU-
51c. Enter this PIN in the configuration utility of the device you want to
connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click this button to have the P-2812HNU-51c create a new PIN.
This displays Configured when the P-2812HNU-51c has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the P-2812HNU-51c or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
This button is available when the WPS status is Configured but not
configurable if you disable WPS.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the P-2812HNU-51c.
Click Apply to save your changes back to the P-2812HNU-51c.
P-2812HNU-51c User's Guide