18.4 Web
You can use the Prestige's embedded web configurator for configuration and file management. See the
online help for details.
18.5 Configuring Remote Management
Click Remote Management to open the following screen.
The following table describes the fields in this screen.
LABEL
Server Type Each of these labels denotes a service that you may use to remotely manage the Prestige.
Access
Select the access interface. Choices are All, LAN Only, WAN Only and Disable.
Status
This field shows the port number for the remote management service. You may change the port
Port
number for a service in this field, but you must use the same port number to use that service for
remote management.
Secured
The default 0.0.0.0 allows any client to use this service to remotely manage the Prestige. Type
Client IP
an IP address to restrict access to a client with a matching IP address.
Apply
Click Apply to save your settings back to the Prestige.
Remote Management Configuration
Figure 18-2 Remote Management
Table 18-1 Remote Management
DESCRIPTION
Prestige 652 Series User's Guide
18-3