5.5.1.5 Default Gateway
The screen is not available when you select Bridging in the WAN Service
Configuration screen.
Figure 42 WAN Configuration: Default Gateway: PPPoE, PPPoA, IPoE or IPoA
The following table describes the labels in this screen.
Table 24 WAN Configuration: Default Gateway: PPPoE, PPPoA, IPoE or IPoA
LABEL
Selected Default
Gateway
Interfaces
Available Routed
WAN Interfaces
Back
Next
5.5.1.6 DNS Server
The screen is not available when you select Bridging in the WAN Service
Configuration screen.
P-2812HNU-51c User's Guide
DESCRIPTION
Select a WAN interface through which you want to forward the traffic.
Select a WAN interface in the Available Routed WAN Interfaces
and use the left-facing arrow to move it to the Selected Default
Gateway Interfaces to use that interface as the default gateway.
To remove a WAN interface from the Selected Default Gateway
Interfaces, use the righ-facing arrow.
The interface on the top of the list gets the highest priority.
Click this button to return to the previous screen.
Click this button to continue.
Chapter 5 WAN Setup
107