Table 28 Network > Wireless LAN > General
LABEL
Apply
Reset
7.4.1 No Security
Select No Security to allow wireless devices to communicate with the access
points without any data encryption or authentication.
Note: If you do not enable any wireless security on your P-2812HNU-51c, your
network is accessible to any wireless networking device that is within range.
Figure 52 Wireless LAN > General: No Security
The following table describes the labels in this screen.
Table 29 Wireless LAN > General: No Security
LABEL
Security
Mode
P-2812HNU-51c User's Guide
DESCRIPTION
Click this to save your changes back to the P-2812HNU-51c.
Click this to reload the previous configuration for this screen.
DESCRIPTION
Choose No Security from the drop-down list box.
Chapter 7 Wireless LAN
133