ZyXEL Communications P-2812HNU-51c User Manual page 77

Table 7 Status Screen
LABEL
Firmware
Version
DSL
Firmware
Version
WAN
Information
Mode
IP Address
IP Subnet
Mask
LAN
Information
IP Address
IP Subnet
Mask
DHCP
WLAN
Information
Channel
WPS Status
WDS Status
AP Information
P-2812HNU-51c User's Guide
DESCRIPTION
This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created. Click this to go
to the screen where you can change it.
This field displays the current version of the device's DSL modem code.
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the P-2812HNU-51c in the
WAN.
This field displays the current subnet mask in the WAN.
This field displays the current IP address of the P-2812HNU-51c in the
LAN. Click this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the P-2812HNU-51c is providing
to the LAN. Choices are:
Server - The P-2812HNU-51c is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The P-2812HNU-51c acts as a surrogate DHCP server and
relays DHCP requests and responses between the remote server and
the clients.
None - The P-2812HNU-51c is not providing any DHCP services to the
LAN.
Click this to go to the screen where you can change it.
This is the channel number used by the P-2812HNU-51c now.
This field displays the status of WPS (Wi-Fi Protected Setup). Click this
to go to the screen where you can change it.
This field displays
• AP when WDS is disabled.
• Bridge when the P-2812HNU-51c functions as a wireless network
bridge only to use WDS (Wireless Distribution System) to establish
wireless links with other APs.
• AP+Bridge when WDS is enabled and the P-2812HNU-51c acts as a
bridge and access point simultaneously.
Click this to go to the screen where you can change it
Chapter 4 Status Screens
77