Using The Wps Button; Using The Web Page - ZyXEL Communications NU-AP699E9N3 User Manual

NU-AP699E9N3 Wireless Router User Manual
as SSID, security mode, and password) to make it have the same SSID and
wireless security settings as the router.
The following describes how to configure WPS for the AP mode.

7.5.4.1 Using the WPS Button

In the AP mode with WDS disabled, press the WPS button on the side panel of
NU-AP699E9N3 and the WPS button on the client device. NU-AP699E9N3 can
perform WPS encrypted connection to the downlink client device.

7.5.4.2 Using the Web Page

You can perform WPS settings using the Web page for configuration.
Choose Wireless Settings > WPS Setup to display the WPS Setup page.
PBC mode
Step 1 Select Push Button and click Start PBC. WPS encrypted connection
starts.
Step 2 Press the WPS button on the network adapter or click the PBC button in
the network adapter configuration tool within 2 minutes to start WPS
connection. After WPS connection is established, the following page is
displayed, indicating that the WPS connection is completed.
PIN mode
Step 1 Select PIN, enter the PIN code of the network adapter (refer to the client
of the network adapter), and click Start PIN to start WPS connection.
39