Sim Card Slot; The Wps Button - ZyXEL Communications LTE3316-M604 User Manual

Figure 3 Zyxel Device Power Button
SIM
Card
Slot

1.5.2.1 SIM Card Slot

The Zyxel Device comes with a built-in 3G/4G/LTE module for mobile connections. To set up a mobile
connection using the built-in 3G/4G/LTE module, just insert a SIM card into the SIM card slot at the back
of the Zyxel Device.
Note: You must insert the SIM card into the card slot before turning on the Zyxel Device.

1.5.2.2 The WPS Button

Your Zyxel Device supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to configure
security settings manually. Each WPS connection works between two devices. Both devices must
support WPS (check each device's documentation to make sure).
Depending on the devices you have, you can either press a button (on the device itself, or in its
configuration utility) or enter a PIN (a unique Personal Identification Number that allows one device to
authenticate the other) in each of the two devices. When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set up
a secure network by themselves.
You can use the WPS button (
quickly set up a wireless network with strong security.
Make sure the power LED is on (not blinking).
1
Chapter 1 Introduction
WPS Button
Power
Reset
Input WAN/
On/ LAN LAN
Off
) on the side panel of the Zyxel Device to activate WPS in order to
LTE3316 Series User's Guide
Phone
17
External
Antenna Ports