Ethernet Operation; Status Lights; Network Connector - Epson AcuLaser C8600 Administrator's Manual

Disadvantages
EPSON Status Monitor 3 cannot be used.
You cannot print via a router.
It takes a longer time to start printing because more time is
required to search for a network printer.

Ethernet Operation

Status lights

The indicator lights (one green and one orange) provide you with
important information on the operations of the Internal Print
Server.
The green light is a data transmission light which flashes when
the host interface receives data.
The orange light indicates whether the Internal Print Server is
connected to 10Base-T or 100Base-TX. The light is on when the
connection is 100Base-TX, or off when the connection is 10Base-T.
Note:
See the Reference Guide for the locations of the lights.

Network connector

RJ-45 connector:
Connect a Category-5 shielded twisted pair cable to the RJ-45
connector on the Internal Print Server. You can use this cable for
both 10Base-T and 100Base-TX.
Getting Started
1
1
1
1
1
1
1
1
1
1
1
1
11