Chapter 7
Settings for NetWare Server
Introduction to NetWare Settings
This chapter explains how to configure the Internal Print Server
for NetWare. First, you need to set up the printer in a NetWare
environment, and then configure the Internal Print Server using
EpsonNet WinAssist.
Supported systems
Server environment
NetWare 3.1/3.11/3.12/3.2 (Bindery)
NetWare 4.1/4.11/4.2 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
NetWare 5.0/5.1 (NDS, NDPS)
NetWare 6.0 (NDS, NDPS)
Client environment
The client environment must be supported by NetWare.
The clients are able to use the printer driver mounted on the
Internal Print Server.
About modes
You can choose either the Print Server, Remote Printer, or Standby
mode. We recommend that you select the Print Server mode
unless the number of users exceeds the limit.
Settings for NetWare Server
7
7
7
7
7
7
7
7
7
7
7
7
105