Twisted-Pair (10BASE-T)
c
Caution:
Do not attach more than one cable at a time.
Making the interface connection setting
Because your printer is set to the auto interface mode by
default, you do not have to make the interface connection
setting. This allows you to connect the Ethernet card to the
network using either a 10BASE-T or 10BASE2 network cable.
To learn more about the interface connection setting, see the
section on SelecType settings in your printer user's guide.
Ethernet Card Operation
The LED lights and the button can provide you with important
information about the operation and configuration of the
Ethernet card.
1-2
Getting Started
Thin Coaxial (10BASE2)