Status
Refresh button
Note:
The printer status is not updated automatically. Press Refresh
to display the latest printer information.
See "Configuration - Network Screens" on page 195 about
NetWare, TCP/IP, AppleTalk, NetBEUI, IPP, and SNMP
information screens.
Configuration - Network Screens
NetWare
NetWare Basic Configuration
Items
NetWare
Frame Type
Mode
A signal shows the status level. The green light is
on when the printer is idle or printing. The yellow
light is on when the paper or toner is low. The red
light is on when the printer has no paper or no toner,
if paper is jammed, the cover is open, or an error
has occurred.
Refreshes the printer status.
Explanations
Enable or Disable NetWare.
Leave the default frame type (Auto) as it is.
Select the appropriate NetWare mode.
EpsonNet WebAssist
11
11
11
11
11
11
11
11
11
11
11
11
195