Using the EpsonNet NDPS Gateway
This section contains instructions on printing using Novell
Distributed Print Services
®
NetWare
the new generation print services of NetWare.
Note:
Banners cannot be printed with NDPS.
The Status Monitor 3 utility cannot be used with NDPS.
Bind the IP or both IP or IPX protocols on the NetWare server that
runs NDPSM.NLM and EPSONGW.NLM.
Check the following points before starting.
Install the appropriate client software, such as Novell Client
for Windows 95/98/Me version 3.3 or Novell Client for
Windows NT/2000 version 4.8, on client workstations. Make
sure they install NDPS.
When you use the Internal Print Server with Bindery (either
in the Print Server mode or the Remote Printer mode), you
need PCONSOLE.EXE to create bindery objects such as Print
Server and Print Queue objects. Since PCONSOLE.EXE does
not come with NetWare 5.x/6.0, you need to get the file from
Novell.
Outline of settings
The followings are basic steps to use the Internal Print Server with
the NDPS printing system. Detailed procedures are described in
the subsequent sections.
1. Install the EpsonNet NDPS Gateway.
122
Settings for NetWare Server
5.x/6.0. Novell Distributed Print Services (NDPS) is
®
®
(NDPS
) with Novell
®